Alcraft Inc.

Flashing.

Door openings by Guedes Associates attached dated 2-20-25 tenant and the following:replace existing light change existing plugs to tamper proofnew with white aluminum. 20 sq.

Shingles, repair remove the any damaged sheathing with 1/2" cdx plywood, copper flashing existing enclosed porch, New addition of rear of the house. Adding 1.

Tear off the existing roof and replace it with shingles.

Strip and re-roof.

Tear off the existing roof and repair any damaged sheathing with plywood, lifetime architectural shingles, and copper flashing.

Tear off the existing roof to the sheathing, install a full ice and water shield, repair damaged sheathing with plywood, and install architectural shingles and copper flashing.

Tear off the existing roof to the sheathing, install ice and water and shingles, and repair damaged plywood.

After-the-fact deck and front wood landing.

Strip and re-roof.

Reside the exterior of the home with new vinyl siding.

Strip and reroof with no structural changes.

Strip and re roof.

Remove existing vinyl siding and install 1/2 insulation. NEW VINYL SIDING WITH ALUMINUM TRIM-NEW GUTTER AND LEADERS; E21-0626-Ele No Fee: Enclose existing covered porch, and bring kitchen/full bath/ and 3 bedrooms all up to code.

Install a 5′-wide shed dormer to allow installation of a 4′ × 4′ manufactured spiral staircase providing access between the second and third floors. The dormer will be fully finished inside and out, with 2-by-4-foot walls, 2-by-8-foot rafters, fiberglass insulation, and 1/2-inch drywall. Include 1 interior light with a switch on both floors and 1 DH window. Roofing and siding to match the exterior.

Tear off the roof. One-half CDX plywood, ridge vent, copper flashing, and architectural shingles. LJ: No paper folder created for this permit.

Tear off roof. One-half CDX plywood, ridge vent, copper flashing, and architectural shingles. Duplicate application; see TB-19-539.