Anthony G Giannitti

Electrical Work

Electrical Work

Electrical Work

Electrical Work

Electrical Work

Electrical Work

Electrical Work

Electrical Permit and Voice/Data

Electrical Permit and Voice/Data

Bathroom interior renovation with plumbing, a GFI circuit, an exhaust fan, and a macerating pump circuit to create a new half bathroom. Scope includes framing, a macerating pump and standard fixtures, electrical wiring, and lighting.

All electrical work per plans and code renovations.

All electrical work per plans. ADU wire 728 sf.

Electrical Work

Electrical for 1 sty addn to the front and new portico and add a 2nd sty addn over existing permit.

Remove ADU-furnish and install recess lights, outlets, switches, fans (ducting by other) boiler wiring provisions for AC per code. Remove and replace service feeder, meter and panels in garage combine 2 panels to 1 200a 66ckt main panel.

Electrical Work

Furnish and install electrical work for a home renovation per plans and code.

Low voltage alarm system in tenant space to silent watchmans layout.

Furnish and install wiring, lighting, and power per MEP plans for tenant fit-up.

Upgrade existing overhead service from 200 A to 400 A overhead service (may become underground per Eversource).

Furnish and install wiring, devices and recess lighting in basement. 1st, second floor and third floor to all bedrms/, common area.

Furnish and install new wiring, lighting, switching, and outlets to code for the primary bedroom, bathroom, and laundry addition.

Relocate interior wiring from the wall that was removed.

Furnish and install wiring, lighting, and outlets to code.

Upgrade the existing 100A service to 200A.

Furnish and install wiring, lighting, and outlets to code for the kitchen, bathroom, office, dining room, and family room.

Furnish and install wiring, lighting, and outlets to code for the living room, bathroom, and dining room.

Upgrade existing 100-amp overhead service to 200A.

Remove, replace, and upgrade the existing 100 amp service to 200 amp. Furnish and install a new panel, breakers, grounding, and bonding.

Furnish and install a new 800 amp, 277/480 V, three-phase underground service to the existing building.

Upgrade and relocate the existing 100A overhead service to 200A, including grounding, bonding, and the panel.

Electrical work for an interior renovation, including new wiring, outlets, lighting, and circuitry to code.

Remove and relocate the service and meter from the middle of the front to the right front corner of the single-family residence.

Electrical for interior renovations to 1 bath and 1 janitors closet in dementia ward.

Interior renovations to convert the porch to an all-seasons room. Provide wiring, switches, and outlets to code.

Replace meter and service drop.

100- to 200-amp service change. Install a surge suppressor in the existing panel.

Add a new outlet location for new step lighting on the deck. The GFCI at deck level is existing and will remain.

Electrical work for tenant fit-up.

Remove and relocate the service from the existing side of the house to the exterior of the new addition. Provide a new meter main, grounding, and bonding.

Furnish and install new wiring for the master bedroom, bathroom, and closet addition.

Electrical Work

Interior renovations to the kitchen and bathroom, including outlets and lighting to code.

Power and lighting install for renovated single-family residence FEMA raised for flood area - wire all appliances and HVAC systems.

Install 400 amp service main outside.

Install temporary service 100-amp.

Remove and replace wiring damaged in a fire in the upper and lower family rooms and kitchen.

Remove existing wiring and lighting in the main warehouse area to prepare for a new installation.

Furnish and install wiring for a new pool pump/filter and heater.

Install generator; E21-0777-Ele No Fee: Install new 20 kW standby generator.

Install new 20 kW standby generator.

Electrical: Upgrade service to 200 amp.

Install 30 A homerun and disconnect for new mini split air conditioning unit.

Furnish and install 2- new drop in ceiling lights, new outlets in office, exist sign in storage room, alarm for space, and power to cash register locations in front of store.

Added breakers and replaced receptacles as needed.

Upgrade existing 100 A service to new 200 A service including panel and all grounding and bonding.

Install a new 20 kW generator. E20-0808-Ele No Fee: Furnish and install 1 new 20 kW standby generator; provide ATS and panel for the new generator.

Furnish and install 1 new 20 kW standby generator provide ATS and panel for new generator.

Electrical: Finish and install new wiring for kitchen remodel.

Electrical: Upgrade service to 200 amp.

Electrical: Install new wiring for a new addition to a single-family residence.

Electrical: Remove and replace wiring as needed for the bathroom remodel; add a new 120V 20A home run for the bathroom.

Add a new circuit for the bathroom from the panel.

Electrical work: Move laundry wiring to the new laundry area and reconfigure the bathroom for a toilet room.

Electrical: Remove and upgrade service to 200 amp; panel done by others.

Electrical interior alterations to the kitchen and bathrooms; replace existing devices as needed. Building 20, Unit 9.

Electrical work for interior renovations to the kitchen, bathroom, and panel in Building 16, Unit 8.

Electrical work for interior renovations to the kitchen and bath: change outlets as needed and replace the panel.

Electrical work for interior renovations to the kitchen, bath, and laundry in Building 18, Unit 11.

Electrical work for interior renovations to the kitchen, bath, and laundry in Building 20, Unit 3.

Electrical: Interior renovations to the existing kitchen and bath, and addition of a laundry room.

Electrical - remove and replace 13 outlets with GFI's for bar area where sinks were added.

Electrical - basement remodel - add 7 recess lights, plugs and 2 switches per code.

Electrical: Upgrade existing service to 200 amp.

Electrical work for interior renovations to the kitchen and bath, and to add a laundry room. Building 1, Unit 13.

Electrical interior renovations to the kitchen and bathroom; add a laundry room and change the panel. Building 2, Unit 23.

Electrical - install new outlets, lighting, kitchen, bathrooms, HVAC, boiler, garage and basement.

Electrical work: Move the meter and main 200 panel, and add subpanels in a new single-family residence (SFR).

Electrical - upgrade exist. 100-amp service including panel and meter to 200-amp new breakers, grounding, bonding and service drop.

Electrical - upgrade exist. service to 200-amp and move meter outside - panel to remain.

Electrical: Rewire the kitchen; install recessed lights in the living room, bedrooms, kitchen, and halls; rewire the upstairs bathrooms as needed.

Electrical: remove and replace service with new 200 amp.

Electrical: Remove the old service, including the panel, and install a new 200 amp service.

Electrical service upgrade: 200 amp and subpanel; second-floor laundry room.

Electrical remodel of an existing single-family residence: new outlets, lights, kitchen, and bathrooms.

Electrical - garage - new lights, outlets as needed, new 100-amp sub panel and new garage door outlets.