Bmr Enterprises LLC

Alteration

Remove the existing flat roof. Install new tapered insulation (ISO Gard) and rubber guard EPDM,. 060 inch (60 mil). Extend the EPDM over all parapets. Flash all penetrations with 9' and 12" Quick Seams flashing. Install new baked aluminum gravel stop on all outside roof edges. All work will be performed according to the manufacturer's specifications. Clean and cart away all debris. Replace any damaged plywood. One-story, stand-alone retail building with an area of 3300 SF. The building is leaking very badly inside the retail space.

Strip existing roof back to deck.install all new materials: ice/water, synthetic underlayment, drip edge, flashing, pipe boots, lead flashing around chimney, 35 yr architectural shingles.

Remove wood trim and stucco from the front of the house. Install new insulation and vinyl siding on the front only.

Install 2 bigfoot piers for load, support. Use existing framing of deck to build a 4 season space.approximately 85sf, one floor with a cathedral ceiling.a new section of decking will be added to one side of the room.will have electric heat in the space.

Strip the roof to the deck and reroof approximately 2800 SF; 2 stories.

Strip the existing roof and reroof.

Strip the existing roof to the deck, then install new ice/water, synthetic underlayment, flashing, drip edge, seam tape, pipe boots, and 35-year architectural shingles.

Strip the existing roof and install new synthetic underlayment, seam tape, ice/water, drip edge, flashing, vent boots, and 35-year architectural shingles.

Strip the existing roof down to the deck. Install new ice and water protection, synthetic underlayment, drip edge, seam tape, pipe boots, 35-year architectural asphalt shingles, and flashing around the chimney.

Strip the existing roof down to the substrate and replace it, including synthetic underlayment, ice/water, drip edge, pipe boots, lead flashing around the chimney, step flashing, 35-year architectural shingles, and ridge vent.