Local provider profile
Documented work across Connecticut based on attributed municipal records.
Contact information
These details have not necessarily been claimed or independently confirmed by the provider.
No contact information was found in the available records.
Work history
Individual records are grouped by address. Totals include only values reported in public records and may not equal final construction cost.
Swimming pool renovation. A safety barrier is required. Fencing and safety devices must comply with the state building code. State education fee paid: $11.70. Electrical: install pool bonding only for the existing inground pool; all pool equipment is existing.
$45KConstruct an inground swimming pool, spa, and required safety barrier under the 2015 IRC and 2018 CT amendments. Fencing and safety devices must comply with the State Building Code per the 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $23.92. Amendment #1, 12.30.20: $40 fee; shift the pool location. Electrical: wiring for the inground swimming pool and spa with all related parts; provisions for site lighting; 2 outlets. Plumbing: install 2 120 AG cylinders; install a 3/4" PE gas line from the tanks to the pool heater.
$92KConstruct an inground swimming pool and required safety barrier in accordance with the 2015 IRC and 2018 CT amendments. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $26.78. Electrical: NEC. Wire for inground swimming pool with all related parts; provision for site lighting. 2 outlets. Plumbing: Install 3 1000 underground tanks; install 1" PE gas line to pool heater.
$103KConstruct an inground swimming pool and required safety barrier under the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $36.40. Plumbing: Run 10 ft. Of plastic line from the existing 3/4" generator to the pool heater. Electrical: Wire swimming pool equipment; 3 lights with GFI reset, 4 motors, and pool cover.
$140KRenovation of existing inground swimming pool; new pool equipment; upgrade electrical; remove and reset stone terrace. State education fee paid: $23.40. Per Sect. AG 106.1 CSBC and Sect. 4.3, APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of cover/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be evaluated, maintained, and replaced by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and CT State codes. Electrical: rewire existing inground pool; lighting, power.
$90K