Christopher J. Finn

Service change from 100 amp to 200 amp.

Electrical Work

Electrical Work

HVAC

Wire Sarafega Spa; install 60-amp line to spa panel with 30A line for heater and 1 20-amp line for control and pumps; rewire spa area with 8 recessed lights, 3 outlets, 1 paddle fan, 1 exhaust. Fan, 1 coach light.

25 devices installed; 4 lights on stone pillars, low voltage light along stonewall; low voltage and high voltage wiring for driveway gates.

Wiring related to the kitchen, powder room, and laundry room renovation; rework existing circuits and add new circuits for new appliances as needed; replace recessed lights with new LED recessed lights.

2 electrical heaters, 1 electrical pool heater; 125-amp ML panel (WP) for hot tub and patio electrical heat. Tub: 1 60-amp, 240 for 11 kilowatt heater; 1 30-amp, 240 V for 2 hp pumps; 1 20-amp, 250 V for hydraulic pool cover. Patio heat: 2 20-amp, 240 circuits with 2 controls.

22 kW generator. Plumbing: gas line to generator. Receipt for $40 paid.

Electrical: bond steel for new pool deck and replace damaged pool light conduit.

50 devices installed; master bedroom and bathroom, guest bedroom and bathroom, and powder room renovation. Amendment (1/24/19): 100 devices installed; 1: range, oven, clothes dryer, dishwasher, microwave, lighting, switching, and outlets.

400-amp overhead service upgrade to the main house with existing 2 meters; install ATS for future connection. Main house has an existing 200-amp service with 2 meters: 100-amp for the main house and 100-amp for the secondary building. Change the service to 400-amp with 2 meters, with 100-amp to feed the secondary building; increase the underground pipe size to the secondary building. Note: 3rd meter on property.

16 kW generator. HVAC: gas line to generator. Receipt 18-2888.

Gas line to generator. Receipt 18-2888.

22 kW generator PLUMB: gas line to generator. Receipt 18-0664.

Pool renovation; install Pentain system controller; wire new filter pump and heater; install 3 low-voltage LED pool lights.

Relocate the existing pool equipment pod (filter pump and heater) to a new location inside the property setbacks.

Wire related to new auto pool cover on existing inground pool.

Deicing equipment (3000w), roof and gutter cable, 2 220 V circuits, and 1 110 V control circuit; Raychem controller with gutter and arrel sensors.

Kitchen and bath renovation; install 9 recessed lights on existing switching outlets to code in the kitchen. New appliances in the same locations.

10 devices installed; First floor: add a shower to the powder room, 3 recessed lights, a GFI outlet, an exhaust fan, and 4 switches.