Local provider profile
Documented work across Connecticut based on attributed municipal records.
Contact information
These details have not necessarily been claimed or independently confirmed by the provider.
No contact information was found in the available records.
Work history
Individual records are grouped by address. Totals include only values reported in public records and may not equal final construction cost.
Construct an inground spa and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $6.50. Electrical: 6 devices installed; wire spa, 2 motors, 1 light.
$25KConstruct an inground swimming pool, spa, and required safety barrier in accordance with the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $33.80. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, a person licensed under a CT SPB or SB1 license shall evaluate, maintain, and replace covers/grates, suction entrapment avoidance systems (including SRVS devices), and components through periodic evaluation, testing, and maintenance, in accordance with applicable manufacturer’s instructions and Connecticut state codes.
$130K2012IRC/2016 CT AMEND Construct Spa Required Safety Barrier. Fencing/safety devices must comply with State Building Code. State Ed Fee paid $13 PER SECT. AG 106.1 CSBC and Sect. 4.3, apsp-7, any pool, spa, or hot tub with a broken, loose or missing suction outlet cover shall be immediately placed out of service until repairs or replacement is completed with an approved outlet cover. In accordance with Section 6.1 of APSP-7 Standard, periodic evaluation, testing and maintenance of cover/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be evaluated, maintained and replaced by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and CT State codes electrical: 6 devices installed; wire pool, 3 motors, 2 hp, 4 pool lights PLUMB: (16-1622p2): repair gas line, install spa heater.
$50KConstruct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $23.40. Per Sections AG 106.1 of the CSBC and 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs are completed.
$90KConstruct an inground swimming pool and required safety barrier under the 2009 IRC. Fencing and safety devices must comply with the State Building Code. State education fee paid: $34.92. Per Section AG 106.1 CSBC and Section 4.3, APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs are completed. Electrical: 10 devices installed; wire pool, 4 motors, 4 lites. Plumbing: connect gas to barbecue and pool heater.
$132K