E L Wagner Co., Inc.

Pool and/or Spa.

Construction of a 20' x 40' in-ground gunnite pool. PER APPLICANT-" No new walls are being constructed as part of this pool project.""Patio work-1,000 SF."

Construction of an 18' x 40' inground gunnite pool. Per applicant: “We are not the ones constructing the patio.”

Pool and/or Spa.

Demolish

Pool and/or Spa.

Construction of a new swimming pool 24' x 55' with integral spa. BPR-24-4: "modification to basement walkout area includes retaining walls, drainage and reconfiguration of inground pool."

Construct an in-ground swimming pool, 10' x 30'.

Amendment 1 - Res

Pool and/or Spa.

Pool and/or Spa.

Pool and/or Spa.

Demolish

Pool and/or Spa.

Pool and/or Spa.

Pool and/or Spa.

Install an in-ground gunite pool measuring 18'x38', with a patio and 24"-high seat wall.

Construct an in-ground swimming pool, 18' x 36'. On 5/3/2022, a 500-gallon underground liquid propane tank and gas line to the pool heater were added to the scope of work.

Accessory Structure.

15'x35' inground pool.

Pool and/or Spa.

Pool and/or Spa.

Inground Pool and Spa.

Gunite swimming pool and legitimize retaining wall. Reverted for a layout and design change of the fence. SR 5/19/20: also adding patio and drainage.

BUI - Residential

Construct an inground swimming pool and spa with a required safety barrier. Fencing and safety devices must comply with the 2015 IRC, 2018 Connecticut amendments, State Building Code per 2018 CSBC, Section 4.3, and APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee: $39. Electrical: wire pool and pool equipment.

Inground Pool.

Inground Pool.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee: $31.20.

Spa with Fire Pit.

Inground pool with spa.

Inground Spa.

Pool with fence.

Pool with spa.

Construct an inground swimming pool, spa, and required safety barrier. 2015 IRC/2018 CT Amend. Fencing and safety devices must comply with State Building Code per Sect. AG 106.1 CSBC and Sect. 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $24.70. Electrical: NEC, 100-amp Subpanel to equipment pad; wire pool/spa equipment: 3 pumps, 1 heater, 3 lights with automation.

Spa/hot tub. State education fee paid: $16.90. Electrical: 6 devices installed; wire pool, 3 motors, 4 pool lights. Plumbing: gas line to pool heater and firepit.

New permanent spa/hot tub. State education fee paid: $19.76. Electrical: wire spa.

Construct an inground swimming pool, spa, and required safety barrier. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $29.90. Electrical: Wire pool.

Construct an inground swimming pool, spa, and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee of $22.10 paid. HVAC: 500-gallon underground liquid propane tank and gas line to heater. Pool electrical: 2 devices installed; wire pool, motors, and 2 lights.

Construct an inground swimming pool, spa, and required safety barrier in accordance with the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $37.70. Electrical: 6 devices installed; wire pool for 3 motors and 3 lights. Plumbing: gas to pool heater.

Construct an inground swimming pool and required safety barrier under the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $11.70 on 7.19.18. Change of contractor: $40 per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of cover/grates and suction entrapment avoidance systems, including SRVS devices, and components shall be performed, and the systems and components shall be replaced, by a person licensed under a CT SPB or SB1 license, in accordance with applicable manufacturer's instructions and Connecticut State codes.

Construct an inground swimming pool and required safety barrier under the 2015 IRC and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $24.44. Electrical: 6 devices installed; wire pool for 2 motors and 4 pool lights. Plumbing: gas line to pool heater.

Construct an inground swimming pool, spa, and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee: $23.40. Electrical: 6 devices installed; wire pool, 2 motors, and 3 lights. Plumbing: gas line to pool heater.

Construct an inground swimming pool and required safety barrier under the 2015 IRC and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $23.14. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates and suction entrapment avoidance systems, including SRVS devices, and their components shall be evaluated, maintained, and replaced by a person licensed under a CT SPB or SB1 license, in accordance with applicable manufacturer's instructions and Connecticut state codes.

Construct an inground swimming pool, spa, and required safety barrier in accordance with the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $33.80. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates, suction entrapment avoidance systems (including SRVS devices), and components shall be performed, maintained, and replaced by a person licensed [CT SPB or SB1 license], in accordance with applicable manufacturer's instructions and Connecticut state codes.

Construct an inground swimming pool and required safety barrier under the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $33.80. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be performed by a person licensed [CT SPB or SB1 license], in accordance with applicable manufacturer's instructions and Connecticut State codes.

Construct an inground swimming pool, spa, and required safety barrier under the 2012 IRC and 2016 CT amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $26. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of cover/grates and suction entrapment avoidance systems, including SRVS devices, and components shall be performed, maintained, and replaced by a person licensed (CT SPB or SB1 license) in accordance with applicable manufacturer’s instructions and CT State codes. Electrical: 12 devices installed; wire pool: 3 motors, 4 pool lights. Plumbing: install gas line to pool heater.

Construct an inground swimming pool and required safety barrier under the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $23.40. Additional impervious area: 412 sf. Electrical: 6 devices installed; wire pool, 2 motors, and 4 lights. Plumbing: 1" gas line for pool heater next to garage.

2009IRC/2013 CT AMEND Construct Inground Swimming Pool and Required Safety Barrier. Fencing/safety devices must comply with State Building Code. State Ed Fee paid. $39 PER SECT. AG 106.1 CSBC and Sect. 4.3, apsp-7, any pool, spa, or hot tub with a broken, loose or missing suction outlet cover shall be immediately placed out of service until repairs or replacement is completed with an approved outlet cover. In accordance with Section 6.1 of APSP-7 Standard, periodic evaluation, testing and maintenance of cover/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be evaluated, maintained and replaced by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and CT State codes.

Construct an inground swimming pool, spa, and required safety barrier in accordance with the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $32.50. Electrical: 12 devices installed; wire pool: 4 motors and 4 lights; install low-voltage (12 V) lighting around pool. Plumbing: connect gas to pool heater. Form existing underground liquid propane tank.

Construct an inground swimming pool and required safety barrier under the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $23.40. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates and suction-entrapment-avoidance systems, including SRVS devices, and their components shall be performed; they shall be maintained and replaced by a person licensed under a CT SPB or SB1 license, in accordance with applicable manufacturer's instructions and Connecticut State codes. Plumbing: Pool-heater gas line; install 200 ft. Of 1 1/2" underground line to the gas meter to serve the new pool heater; air test for inspection.

Construct an inground swimming pool under the 2003 IRC, with a required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $31.20. Per Sect. AG 106.1 CSBC and Sect. 4.3, APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs are completed.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $10.40. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs are completed. Electrical: 6 devices installed; wire pool, 2 motors, and 2 lights. HVAC: install gas line for pool heater.

Construct an inground swimming pool and required safety barrier under the 2009 IRC. Fencing and safety devices must comply with the State Building Code. State education fee paid: $26. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs are completed. Electrical: 6 devices installed; wire pool: 2 motors, 2 lights. Plumbing: Install gas piping for 1 pool heater.

Renovate existing pool to bring it up to current code and provide entrapment protection. The complete inspection process was not completed under original permit P-9571. State education fee paid: $2.60. Per Sect. AG 106.1 CSBC and Sect. 4.3, APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs are completed.