Eben Ezer Roofing LLC

Re-Roof.

Roof replacement.

Remove existing roofing to sheathing, install new asphalt roof with all required underlayments.

Re-Roof.

Re-Roof.

Remove the existing asphalt shingles and install new shingles; Remove the existing asphalt shingles a total of 2,640 SF; Inspect all the plywood if need to be replace this will be extra charge for $110.00. Per sheet remove and install it ½ inch; Install aluminum custom make gutter flashing; Apply 6 feet of ice weather shield up slope at eaves and install 3 of ice weather shield in the valleys; And 18 inch’s of ice weather shield around of pipe chimney bases; Install 4 inch’s roof deck seam tape over each join of the plywood what is required by CT state law; Install synthetic roofing underlayment; Install new Gaf timberline lifetime HDZ new shingles will be fastened with 1 ¼ nails; Replace the existing vent pipe boot; And cut 1 inch on each side of the attic and install ridge vent in the main house; Install new copper flashing in the chimney.

Retire las tejas de asfalto existentes e instale tejas; Quitar las tejas de asfalto existentes un total de 2,640 pies cuadrados; Inspeccione toda la madera contrachapada si es necesario reemplazarla, se cobrará un cargo adicional de $110.00. Por hoja quitar e instalar ½ pulgada; Instale tapajuntas de aluminio para canaletas hecho a la medida; Aplique 6 pies de protección contra el clima de hielo cuesta arriba en los aleros e instale 3 de protección contra el clima de hielo en los valles; Y 18 pulgadas de protección contra la intemperie contra el hielo alrededor de las bases de las chimeneas de tuberías; Instale una cinta para costuras de cubierta de techo de 4 pulgadas sobre cada unión de la madera contrachapada según lo exige la ley estatal de CT; Instale un contrapiso sintético para techos; Instale nuevas tejas Gaf Timberline Lifetime HDZ Las nuevas tejas se sujetarán con clavos de 1 ¼; Reemplace la funda del tubo de ventilación existente; Y corte 1 pulgada a cada lado del ático e instale una ventilación de cumbrera en la casa principal; Instale tapajuntas de cobre nuevo en la chimenea.

Remove two layers of roofing. Install one-inch ISO insulation, secured with 3" plates. Install an EPDM rubber roof, a new roof vent, and custom-made aluminum gutter flashing. Remove and replace 178 feet of gutters. Install 120 ft of 3-by-4 downspout. Install plywood if needed.

New Roof.

Re-Roof.

Remove two layers of asphalt shingles totaling 4,655 SF. Install aluminum custom-made gutter flashing, 6 ft of ice and weather shield upslope at the eaves, synthetic roofing underlayment, and new GAF architectural roofing shingles, fastened with 1 1/4 nails. Replace 6 existing vents and pipe boots. Install 292 line feet of 5K seamless gutters with hangers and 160 line feet of 2-by-3 downspout.

1. Remove a total of 4,340 SF of roofing material down to the metal deck or maybe wood deck and inspect if something is rotten and need to be replace 2. Install tapered insulation starting from 12 to 1 and to 1 22 and 172 to inch's 3. Continue stalling 2 inch's iso insulation screw it with 3 inch's plates4. Install new E. P. D. M. 060 rubber roof 5. Laps will be use 6 inch's over laps with 6 inch's seam tape6. Make all the details to AC boxes and around of the pipe 7. Install termination bar in the parapet walls 8. All details are done as recommended by the manufacturer.