Glenn Pack

HVAC, Geothermal, Chimney liners & Oil Tank Permit WILTON

HVAC Work

HVAC Work

Install a ducted heat pump system for a new renovated bedroom.

HVAC Work

Replace 4 10-ton gas/electric packaged roof mounted units.

Replace existing hyro air fan coil and outdoor AC unit with new equip. In same location and connect to the existing piping and wiring, new refrigerant piping included.

Install two multi-head ductless split heat pump systems for a single-family residence.

HVAC Work

Install direct gas fired make up air unit on roof, ducting to ceiling outlets in cleaning room, gas piping from existing gas main inside building to new unit on roof, wiring and roofing by others.

Replace roof mounted gas/electric heating and cooling unit that serves the front offices.

Mechanical: Install 7 gas-fired unit heaters and gas piping from the meter to the new unit.

Install a new ducted air conditioning system for the right side of the house.

Installation of a direct-vent boiler and related heat piping, a kitchen makeup air fan system, five heat pumps with 13 air handlers, miscellaneous bathroom and laundry fans and venting, and four steam humidifiers.

Remove the existing gas-fired boiler and replace it with a new high-efficiency gas-fired boiler.

Replace existing direct-vent gas-fired furnace and air conditioning equipment.

HVAC Work

Direct replacement of existing AC equipment with new high-efficiency heat pump equipment, located in the same location and connected to existing ductwork, wiring, and piping.

Install a 16,000 BTU ductless split heat pump system for the guest building.

Remove two condensing gas furnaces and cooling equipment and replace them with new equipment of equal capacity in the same location.

HVAC Work

HVAC Work

HVAC Work

Direct replacement of a condensing gas-fired furnace, evaporator coil, and roof-mounted condensing unit that services the first floor of the building.

Repair leaking gas piping as needed.

HVAC Work

Replace second-floor hydro air equipment.

HVAC

HVAC Work

HVAC

Install radiant heat on the ground floor, a new boiler, and three Mitsubishi heat pumps.

Mechanical: Replace the existing air handler and outdoor unit with new units.

Mechanical: heat pump replacement, Unit C9.

Mechanical: replace heat pump equipment.

Mechanical: Remove the boiler and water heater and replace them with new ones.

Mechanical: Remove first-floor hydro equipment and replace it with new equipment.

Mechanical: Remove old equipment and replace it with new equipment, tie into existing ductwork and piping, and activate and test.

Mechanical: Remove existing air-conditioning equipment and replace it with new equipment.

Mechanical: Replacement of oil furnace and installation of fan in can.

Mechanical - replace 40 gallon gas fired water heater.

Mechanical: Remove and install a gas-fired furnace, evaporator coil, and condensing unit.

Mechanical: replace existing furnace.

Mechanical: Remove the existing gas-fired water heater and replace it with a new unit.

Mechanical: Install 4 mini-split heads (2 per floor) to provide primary heating and cooling, and install an outdoor unit to code.

Mechanical: Remove the existing gas/electrical rooftop unit and replace it. Existing gas piping and wiring will be reconnected to the new unit.

Mechanical: Remove the existing furnace and AC and replace them with new equipment.

Mechanical: Remove the air conditioning and replace all equipment with new equipment. Tie into existing ductwork, piping, and wiring; activate and test the system.

Mechanical: Remove existing AC with electric heater and install a new hydro air system for the family room.

Mechanical: Remove the existing furnace and air conditioner and replace them with new units.

Mechanical: Remove and replace equipment, set and tie into existing ductwork, piping, and wiring, and activate and test.

Mechanical: Replace existing air-conditioning equipment.

Mechanical: Remove and install a heat pump and electric water heater.

Mechanical: miscellaneous duct work.

Mechanical: remove and install gas furnace and AC.

Mechanical: Install a ductless split heat pump system.

Mechanical - replace heating and cooling on 3rd and fourth floor, 2 gas furnaces and 1 condenser per floor.

Mechanical: Remove the existing furnace coil, condensing unit, and thermostat and replace them with new ones.

Mechanical: Remove the existing heat pump and replace it with a new one.

Mechanical: Remove the existing heat pump and replace it.

Mechanical: replace heat pump for residence.

Mechanical: replace heat pump, Unit B5.

Mechanical: Replace the existing heat pump, unit C/10.

Mechanical: Remove the existing gas furnace and cooling equipment and install new equipment.

Mechanical: replace cooling system.

Mechanical: replace the cooling system for the server room.

Mechanical: replace oil-fired boiler.

Mechanical: replace gas/electric packaged rooftop unit.

Mechanical: replace cooling system.

Mechanical: replace gas furnace on the second floor.

Mechanical: replace cooling for residence.

Mechanical: replace gas furnace.

Mechanical: replace cooling equipment.

Mechanical: Replace cooling system.

Mechanical: install a ductless split system.

Mechanical: Replace heat pump in Unit C/4.

Mechanical: Replace heat pump, Unit 17.

Mechanical: replace heat pump.

Mechanical — replace cooling system on the first floor.

Mechanical: furnish and install a ductless split cooling system for the basement.

Mechanical: replace AC system.

Mechanical - propane to replace exist. main floor cooling equipment.

Mechanical: Replace the rooftop unit for commercial space.

Mechanical: remove and replace cooling unit.

Mechanical: replace cooling system.

Mechanical: Replace 2 heating and cooling systems at “Il Posto.”

Replace the existing heating and cooling system.