Gunner LLC

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Work is limited to the garage roof.

Alteration

Remove and replace existing roof. Inspect roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install water and Ice barrier, underlayment, asphalt shingles, and proper ventilation. Flat roof will not be part of the replacement.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Only the asphalt roof is being replaced.

Remove and replace the existing roof (main building only). Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new black aluminum 6” K-style gutters using hidden fasteners, elbows, and downspouts.

Remove and replace the existing roof. Install water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Remove and replace the existing roof. Install all new plywood decking to meet code. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. The barn roof is being replaced; the cupola on the barn is not to be touched and will remain cedar for the aesthetic.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, a water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Tear off the roof and replace damaged plywood. Install rigid insulation on the decking, with screws and galvanized plates to the insulation board. Prime the insulation with EPDM primer. Apply EPDM adhesive to the top of the insulation. Install black EPDM, cover tape on all seams, and standard aluminum drip edge.

Partial removal and replacement of the existing roof (9.14 squares). Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6” K-Style gutters using hidden fasteners, elbows, and downspouts. Remove and discard 3 existing skylights and replace them with new ones. Install a new Velux skylight. Flash the skylight using a Velux flashing kit and install an ice and water membrane around it.

Remove and replace the existing roof on the house and detached garage. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6” K-style gutters using hidden fasteners, elbows, and downspouts on the house and detached garage.

Remove and replace existing Siding with James Hardie Lap siding.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Full redecking is necessary on the garage only, using ½″ CDX plywood, approximately 21 sheets. The main house has tongue-and-groove sheathing. Install seam tape per Connecticut code, water and ice barrier, underlayment, Brava Multi Width Shake at a 10″ exposure, and proper ventilation. Remove and discard 7 existing skylights. Install a new fixed Velux skylight. Install new white aluminum 6″ K-style gutters using hidden fasteners, elbows, and downspouts.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Revised to include 45 squares to be replaced: MK 8.17.26.

Alteration

Alteration

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new black and white aluminum 6-inch K-style gutters using hidden fasteners, elbows, and downspouts.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install a water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Remove and discard 1 existing window on the second floor at the rear of the home, in the guest room. Inspect the window opening to ensure the framing is in good condition for proper installation. Install sill flashing tape and a replacement double-hung vinyl window according to the manufacturer's written instructions. Use spray foam to seal gaps between the window and framing, if applicable. Window specifications: 1 replacement double-hung vinyl window, manufacturer: PARADIGM. Grids: Removable, 6 over 6 (see photo; mimic existing). Grid style: Removable interior. Interior and exterior window color: white. Screens: Yes. Standard hardware: White.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Remove and discard 2 existing skylights. Install a new fixed skylight. Flash the skylight using a skylight flashing kit and install an ice and water membrane around the skylight.

Alteration

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and tee barrier, underlayment, asphalt shingles, and proper ventilation. Remove and replace 1 existing skylight. Install a new Velux skylight.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Tear off the roof (1 layer included; additional layers uncovered: $25 per SF). Inspect plywood and replace damaged plywood as needed (3 sheets of ½-inch included; additional ½-inch sheets: $110 per sheet, or ¾-inch plywood: $130 per sheet). Install an SBS self-adhering base sheet onto plywood. Install a black SBS self-adhering cap sheet over the base sheet. Install standard aluminum drip edge C6, white. Install flashing around penetrations if applicable.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6” K-Style gutters using hidden fasteners, elbows, and downspouts. Remove 2 existing skylights and install new Velux fixed skylights.

Alteration

Re-Roof.

Underlayment, Install new including handler electrical asphalt shingles, and proper ventilation. Dedicated 10-gauge electrical circuit for HVAC condenser unit, all required conduit and wiring connections. Connect and terminate air components. Install new service receptacle/outlet in compliance.

Remove and replace existing Siding with James Hardie Lap siding.

Remove and replace existing siding with James Hardie lap siding. Install new white aluminum 6-inch K-style gutters with hidden fasteners, elbows, and downspouts. Install gutter guards. Remove and discard 2 existing doors. Inspect door openings to ensure the framing is in good shape for proper installation. Install flashing tape and install doors according to the manufacturer’s written instructions. Door 1: Entry door; Therma-Tru Fiber Classic Mahogany Collection. Grids: No. Interior/exterior door color: Driftwood. Exterior trim: Hardie. Door 2: Slider; Andersen 100. Grids: No. Interior/exterior door color: Black. Exterior trim: Hardie. Screen: Yes. Hardware: Black.

Alteration

Remove existing siding. Inspect plywood and replace as needed. Wrap all exposed sheathing with Tyvek House Wrap. Install 2.5-inch vinyl lineal around all windows and doors. Install vinyl starter strip. Install CertainTeed Monogram 4-inch Lap siding (D4), color Colonial White. Install white vinyl inside and outside corners. Remove and replace soffit using white Beaded Vinyl Vented hidden soffit. Wrap fascia boards with white aluminum. Install 3 new white vinyl gable vents. Install siding with stainless steel nails. Remove and discard shutters. Install new black shutters. Furr the brick at the front of the home and install Colonial White lap siding over it.

Remove existing windows and door and discard. Inspect window/door openings to ensure framing is in good shape for proper installation. Install sill flashing tape. Install window to manufacturer written instructions. Utilize spray foam to seal gaps between window and framing if applicable. Window specific information: Window style: Slider; Window type: 400; Grids: No; Interior/exterior window color: White; Exterior trim: Aluminum special order black; Interior Primed Trim for New Construction; Screens: Yes; Standard hardware: White. SGD specific information: SGD type: 400; Grids: No; Interior/exterior window color: White; Exterior trim: Aluminum special order black; Interior Primed Trim for New Construction; Screens: Yes; Standard hardware: White. Install Andersen 400 series window, 56 x 42 (Picture for reference in Contract). Install Andersen 400 Sliding glass door 98” (Picture for reference in Contract).

Alteration

Alteration

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Tear off the low-slope roof. Inspect plywood and replace damaged plywood as needed. Install an SBS self-adhering base sheet onto plywood. Install an SBS self-adhering cap sheet over the base sheet, color Charcoal. Install standard aluminum drip edge C6, white. Install flashing around penetrations if applicable. Install new white aluminum 6-inch K-style gutters using hidden fasteners, elbows, and downspouts.

Alteration

Partial roof replacement. Remove and replace existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Replace 4.73 squares only.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Window/Door Replacement.

Alteration

Alteration

Remove and replace existing Siding with James Hardie Lap siding.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install a water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Tear off the low-slope roof. Inspect the plywood and replace damaged plywood as needed. Install an SBS self-adhering base sheet onto the plywood. Install an SBS self-adhering cap sheet over the base sheet, in Pewter Grey. Install standard aluminum drip edge C6, white. Install flashing around penetrations, if applicable. Install new white aluminum 6” K-style gutters using hidden fasteners, elbows, and downspouts.

Building

Siding.

Alteration

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, a water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Remove and replace existing siding with James Hardie lap siding. Remove 9 existing windows, discard them, and install new Andersen double-hung windows with no grids and removable interior. Remove the existing front door, discard it, and install a new THERMATRU Fiberline MAHOGANY front door with ¼ glass.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Building

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Complete work on the home and shed on the property.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install copper chimney cricket 2 and solder joints. Install seam tape on plywood seams per code (Connecticut only). Reuse the existing gutter system; remove and re. Install if necessary. Install a Broan vent and coordinate with the homeowner on its location. Install shingles on the front door porch and bay windows.

Building

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Main house only.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6” K-Style gutters using hidden fasteners, elbows, and downspouts.

Remove and replace the existing roof. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6” K-style gutters with hidden fasteners, elbows, and downspouts. Replace all old 4” K-style gutters; approximately 25 linear feet of gutters have already been replaced with 6” gutters and will not need to be replaced.

Re-Roof.

Alteration

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Alteration

Re-Roof.

Alteration

Alteration

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new copper flashing at the roof-to-wall intersection and remove and dispose of the old flashing. Flashing at the roof-to-wall intersection is approximately 10 LF. Un. Install and re. Install siding to properly install the flashing.

Remove and replace existing roof. Remove 17 existing windows and discard. Inspect window openings to ensure framing is in good shape for proper installation. Window style: ANDERSEN 400 SERIES CASEMENTRemove 1 existing door and discard. Door Style: ANDERSEN 400 SERIES Door Type: SLIDING GLASS DOOR.

Tear off existing asphalt shingles. Inspect plywood and replace damaged plywood as needed. Install GAF Architectural Timberline HDZ asphalt shingles – Pewter Grey. Tear off roof liberty roof. Inspect plywood and replace damaged plywood as needed. Install SBS self-adhering base sheet onto plywood. Remove and discard existing skylight. Install new Velux fixed skylight. Flash skylight using Velux flashing kit and install ice and water membrane around skylight.

Re-Roof.

Roof replacement with Liberty Roof (only 4.5 squares).

Building

Remove and replace the existing cedar roof. Install 1/2" CDX plywood on the entire roof of the home and garage. Install GAF Storm Fuard Ice and Water underlayment on the entire roof. Install a custom-fabricated drip edge. Install aluminum .032 metal standing-seam panels, 15.5" on center. Remove and replace 4 existing skylights. Install new fixed Velux skylight.

Window install (to the right of the fireplace): Install new Anderson 100 Picture Window 16 Light Finelight, 42 1/2-by-49-foot. Will add header and appropriate framing for new window installation.

Remove and replace existing roof. Inspect roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install water and Ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6” K-Style Gutters using hidden fasteners elbows and downspouts. 27.06 Squares.

Shingles using stainless steel nails.

Partial roof replacement of 4.25 squares. Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Alteration

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6” K-style gutters using hidden fasteners, elbows, and downspouts.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Re-Roof.

Window/Door Replacement.

Remove and replace existing siding with James Hardie lap siding. Tear off the kitchen bay window roof, about 1 square. Install an SBS self-adhering base sheet onto plywood, then install an SBS self-adhering cap sheet over the base sheet in black. Install new white aluminum 6” K-style gutters using hidden fasteners, elbows, and downspouts.

Roof replacement with GAF asphalt shingles on the house and detached garage.

Remove and replace existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6” K-style gutters using hidden fasteners, elbows, and downspouts.

Remove the existing slate roof and install a new roof (garage only).

Alteration

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, water and ice barrier, underlayment, asphalt shingles, and proper ventilation.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6” K-style gutters using hidden fasteners, elbows, and downspouts. Install 2 stainless steel chimney flue caps.

Remove and replace existing siding with James Hardie lap siding - metal roof replacement on bay windows marked with an X on contract.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code; install water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Provide pictures of the underlayment for final inspection.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code. Install water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6-inch K-style gutters using hidden fasteners, elbows, and downspouts. Install seam tape on plywood seams per code (Connecticut only). Existing downspouts going into the rear patio drains will remain as-is; all other downspouts will be replaced. Repair siding (circled in red below). Remove and replace siding with PVC installed with white aluminum apron flashing.

Re-Roof.

Remove and replace the existing roof. Inspect the roof deck to verify that all sheathing is suitable. Install seam tape per Connecticut code, a water and ice barrier, underlayment, asphalt shingles, and proper ventilation. Install new white aluminum 6” K-Style gutters using hidden fasteners, elbows, and downspouts. Tear off the existing roof. Inspect plywood and replace damaged plywood as needed. Install ½” rigid insulation on the decking. Install screws and galvanized plates to the insulation board. Prime the insulation using EPDM primer. Install EPDM adhesive on top of the insulation. Install black EPDM, 60 mil thickness. Install cover tape on all seams. Install Standard Aluminum Drip Edge C6.

Alteration

Remove and replace the existing roof, 12.94 squares.

Asphalt shingles and proper ventilation.

Re-Roof.

Building

Remove and replace existing Siding with James Hardie Lap siding.