Home Exteriors LLC

Reroof 4 buildings for Seaside Commons Association: 254 A-F Seaside, 266A-D Seaside, and 34A-D Dora, Seaside Avenue. Strip the existing roof, replace rotted or damaged plywood, and install new roofing using 12 linear steps of a GAF-certified roof.

Re-roofing project: Strip the existing roof and replace any rotted or damaged plywood. Install 12 linear steps of a GAF-certified roof.

Damaged plywood and 12 linear steps of a GAF-certified roof.

Building

Re-roof by stripping the old roof, replacing any rotted plywood, and installing 12 linear steps of a GAF certified roof.

Reroof by stripping the old roof and beginning the linear 12-step process for a new Home Safe GAF-installed roof.

Alteration Residential

Add Residential Alter

Remove existing roofing to the wood and clean the entire decking. Replace any rotted wood or damaged plywood with CDX plywood: 1/2 at $70.00 per sheet or 3/4 at $90 per sheet. Install new CDX plywood over the entire roof area: 1/2 0 3/4 0. Install new aluminum drip-edge metal on all roof-deck eaves and new aluminum rake-edge metal on all outside rake edges. Color: white. Install new aluminum/galvanized steel flashing as needed, new Oatey vent pipe boot flashings, 6 feet of new GAF WeatherWatch ice and water shield on all roof edges, and new GAF WeatherWatch ice and water shield. Install new GAF FeltBuster synthetic felt paper over the entire roof decking, new copper chimney flashing, and new GAF Timberline HDZ architectural roofing shingles.

Reroof.

Re-Roof.

Home Exteriors LLC will furnish all permits, labor, materials, equipment, apparatus, tools, transportation, and services necessary for, and incidental to, the proper installation and completion of an asphalt shingles roof replacement on the abovementioned project. This work will include removing and disposing of existing roofing, installing underlayment, installing new flashings as specified below, and installing new roofing to cover the entire roof area to leave a very long-term, damage-resistant, weatherproof roof. 2- Home Exteriors LLC shall use workmen trained and experienced in laying asphalt shingles roofs, installing metal flashing, and all other skills needed to complete the project as specified. Home Exteriors LLC shall keep the house weatherproof and make every reasonable attempt to complete the project on schedule. 3- Work Includes : - Remove the existing Roofing to wood, Clean the entire decking, and Back Nail all Plywood. If no plywood exists on the roof area, it may need to be installed for an extra cost. Replace any rotted wood or damaged Plywood with cdx 1/2 plywood at $70.00 per sheet or $90 for 3/4 per sheet (We will honor 6 sheets of plywood for the client.) -Installing New CDX plywood over the entire roof area: 1/2 3/4 - Tape all the joints and seams of the roof deck using Tite - Seal waterproof roof Deck Tape selfadhering, per code (4 inches). Install new aluminum drip-edge metal on all eaves of the roof deck. Color: White - Install new aluminum rake edge metal on all outside rake edges Color: White - Installing New Aluminum/galvanized steel flashing as needed - Install new Oatey vent pipe boot flashings - Installing 6 feet of new GAF WeatherWatch ice water shield all edges of the roof - Installing new GAF WeatherWatch ice water shield on walls, chimneys, around skylights and valleys - Installing new GAF feltbuster Synthetic felt paper over the entire roof decking - Installing new Copper chimney Flashing -Installing new GAF Timberline HDZ Architectural Color: Tdb -Installation of new roofing shingles to be in accordance with manufacturer’s specifications and state and local codes - installing new GAF ridge vents on the top edge of the roof. Cobra Snow Country Cobra exhaust vent - installing new GAF Seal a ridge or timbertex Ridge caps - GAF 25 Years StainGuard Warranty against algae - Included - GAF No Maximum Wind Speed Warranty, Windproven - Included - Installing six galvanized nails per sheet of shingles - Clean up of project site and get all the nails using Magnetic Sweepers and disposal of all project waste. Home Exteriors LLC provides all labor, material, and dumpster - Tools, equipment, surplus materials, shingles scraps, and debris resulting from the roof installation will be organized and cleaned up, or removed and disposed of by Home Exteriors LLC daily. Roof Color to be chosen by the owner - Home Exteriors LLC will carry General Liability Insurance and Workers’ Compensation Insurance and will provide Certificates of Insurance to the Client before the execution of any work upon request.

Remove and dispose of existing roofing. Install underlayment, new flashings, and new roofing over the entire roof area.

Roof replacement.

Replacing the roof on a two-story home. 1384 SF.

Replacing entire roof.

Building

Building

Re-roof. Remove the existing gutters, downspouts, elbows, and anchors attached to the house. Install new white gauge aluminum 5-inch K-style seamless gutters (fascia gutters). Use Quick Screw Hidden Hangers to attach the gutters to the roof. Install white aluminum leader downspouts and secure them with anchors. Install white aluminum leader elbows where needed. Install other white aluminum end caps, conductor heads, etc. Mount the aluminum downspouts with aluminum straps. Also install elbows to divert water into the splash blocks.

Reroofing.

Building

Reroof.

Reroof the entire house, 1700 SF.

Reroof the house, 1600 SF.

Re-roof 3400 sf.

Reroofing.

Remove existing Roofing to wood, Clean the entire decking, and Back Nail all Plywood. If there is no existing plywood on the roof area it may need to be installed for an extra cost. Replace any rotted wood or damaged Plywood with cdx 1/2 plywood at $80.00 per sheet or $100 for 3/4 per sheet - Fascia wood boards $15.00 per linear foot and rafter Replacement or sistering $205.00 each - Above the cost of the roof. -Intalling New CDX plywood over the entire roof area: 1/2 0 3/4 0 - Tape all the joints and seams of the roof deck using Tite - Seal waterproof roof Deck Tape selfadhering, per code (4 inches). - install new aluminum drip-edge metal on all eaves of the roof deck. Color: white - Install new aluminum rake edge metal on all outside rake edges Color: white - Installing New Aluminum/galvanized steel flashing as needed - Install new Oatey vent pipe boot flashings - Installing 6 feet of new GAF WeatherWatch ice water shield all edges of the roof - Installing new GAF WeatherWatch ice water shield on walls, chimneys, around skylights and valleys - Installing new GAF feltbuster Synthetic felt paper over the entire roof decking - Installing new COPPER chimney Flashing -Installing new GAF Timberline HDZ Architectural Color: TBD -Installation of new roofing shingles to be in accordance with manufacturer’s specifications and state and local codes - Installing 6 galvanized nails per sheet of shingles - installing new GAF ridge vents on the top edge of the roof. Cobra Snow Country Cobra exhaust vent - installing new GAF Seal a ridge or timbertex Ridge caps - Clean up of project site and get all the nails using Magnetic Sweepers and disposal of all project waste.

Remove existing Roofing, Back Nail all Plywood, Replace any rotted wood or damaged Plywood with cdx 1/2 plywood, install new aluminum drip-edge metal on all eaves. Install new Oatley vent pipe boot flashings - Installing 6 feet of new GAF WeatherWatch ice water shield all edges of the roof - Installing new GAF WeatherWatch ice water shield on walls, chimneys, around skylights and valleys - Installing new GAF feltbuster Synthetic felt paper over the entire roof decking - Installing new chimney Flashing. Installing 6 galvanized nails per sheet of shingles - installing new GAF ridge vents on the top edge of the roof. Cobra Snow Country Cobra exhaust vent - installing new GAF Seal a ridge or timbertex Ridge caps. Installing new GAF Timberline HDZ.

New asphalt shingles.

Remove the existing roofing down to the wood, clean the entire decking, and back-nail all plywood. If there is no existing plywood on the roof area, it may need to be installed at an extra cost. Replace rotted wood or damaged plywood with CDX plywood: 1/2 at $90.00 per sheet or 3/4 at $100 per sheet. Fascia wood boards: $15.00 per linear foot. Rafter replacement or sistering: $205.00 each, above the cost of the roof. Install new CDX plywood over the entire roof area: 1/2 or 3/4. Tape all joints and seams of the roof deck with Tite-Seal self-adhering waterproof roof deck tape, per code (4 inches). Install new white aluminum drip-edge metal on all eaves of the roof deck and new white aluminum rake-edge metal on all outside rake edges. Install aluminum or galvanized steel flashing as needed and new Oatey vent pipe boot flashings. Install 6 feet of new GAF WeatherWatch ice and water shield along all roof edges, and new GAF WeatherWatch ice and water shield on walls, chimneys, around skylights, and in valleys. Install new GAF FeltBuster synthetic felt paper over the entire roof decking and new lead chimney flashing. Install new GAF Timberline HDZ architectural shingles, color TBD, in accordance with the manufacturer's specifications and state and local codes, using 6 galvanized nails per sheet of shingles. Install new GAF ridge vents on the top edge of the roof: Cobra Snow Country Cobra exhaust vent. Install new GAF Seal-A-Ridge or Timbertex ridge caps.

Remove existing roofing to the wood. Install new CDX plywood over the entire roof area and tape all joints and seams of the roof deck. Install new lead chimney flashing, GAF Timberline HDZ roofing shingles in accordance with the manufacturer’s specifications and state and local codes, a new ridge vent at the top edge of the roof, and GAF Seal-A-Ridge on the hip and ridge (ridge caps).

Alteration

Remove existing Roofing to wood, Clean the entire decking, and Back Nail all Plywood. If there is no existing plywood on the roof area it may need to be installed for an extra cost. Replace any rotted wood or damaged Plywood with cdx 1/2 plywood at $80.00 per sheet or $100 for 3/4 per sheet - Fascia wood boards $15.00 per linear foot and rafter Replacement or sistering $205.00 each - Above the cost of the roof. -Intalling New CDX plywood over the entire roof area: 1/2 0 3/4 0 - Tape all the joints and seams of the roof deck using Tite - Seal waterproof roof Deck Tape selfadhering, per code (4 inches). - install new aluminum drip-edge metal on all eaves of the roof deck. Color: white - Install new aluminum rake edge metal on all outside rake edges Color: white - Installing New Aluminum/galvanized steel flashing as needed - Install new Oatey vent pipe boot flashings - Installing 6 feet of new GAF WeatherWatch ice water shield all edges of the roof - Installing new GAF WeatherWatch ice water shield on walls, chimneys, around skylights and valleys - Installing new GAF feltbuster Synthetic felt paper over the entire roof decking - Installing new COPPER chimney Flashing -Installing new GAF Timberline HDZ Architectural Color: TBD -Installation of new roofing shingles to be in accordance with manufacturer’s specifications and state and local codes - Installing 6 galvanized nails per sheet of shingles - installing new GAF ridge vents on the top edge of the roof. Cobra Snow Country Cobra exhaust vent - installing new GAF Seal a ridge or timbertex Ridge caps.

3- Work Includes : - Remove all wall fashing, termination bar, pipe flashings to prepare for the new roofing system. All Perimeter metal snap-on fascial will be removed and reassembled when the roofing project is completed - Install on layer of 1'' iso insulation will be fully adhered to the new roof using cr20 low rise foam adhesive. We will then fully adhere the new flat roof to the insulation using the manufacture's bonding adhesive. Install new EPDM clean 060: Color: black - Install pre-fabricated flashings for all penetrations pipes and protrusions on the roof. All pitch pans will be filled with pourable sealant. Install termination bar and counter-flashing to fastened all vertical wall flashings. Install new vertical wall scupper drain to all drains that are not salvageable and deteriorated. All EPDM accessories will be installed whereas needed and as per manufacturers specifications - Caulk and seal to provide a watertight system - At the end of each day, the working area will be made watertight to protect the building from normal weather conditions. The work area will be cleaned of all roofing debris and broom cleaned after job completion. The work area will be magnetically swept to pick up any left-over nails after job completion.

Remove existing roofing to the wood, clean the entire decking, and back-nail all plywood. Replace any rotted wood or damaged plywood with CDX 1/2 plywood. Install new CDX plywood over the entire roof area. Install new aluminum drip-edge metal on all eaves of the roof deck and new aluminum rake-edge metal on all outside rake edges. Install new aluminum/galvanized steel flashing as needed.

Strip and reroof with no structural changes.

Remove existing Roofing to wood, Clean the entire decking, and Back Nail all Plywood. If there is no existing plywood on the roof area it may need to be installed for an extra cost. Replace any rotted wood or damaged Plywood with cdx 1/2 plywood at $80.00 per sheet or $100 for 3/4 per sheet - Fascia wood boards $15.00 per linear foot and rafter Replacement or sistering $205.00 each - Above the cost of the roof. -Intalling New CDX plywood over the entire roof area: 1/2 10 3/4 - Tape all the joints and seams of the roof deck using Tite - Seal waterproof roof Deck Tape selfadhering, per code (4 inches). - install new aluminum drip-edge metal on all eaves of the roof deck. Color: White - Install new aluminum rake edge metal on all outside rake edges Color: white - Installing New Aluminum/galvanized steel flashing as needed - Install new Oatey vent pipe boot flashings - Installing 6 feet of new GAF WeatherWatch ice water shield all edges of the roof - Installing new GAF WeatherWatch ice water shield on walls, chimneys, around skylights and valleys - Installing new GAF feltbuster Synthetic felt paper over the entire roof decking - Installing new COPPER chimney Flashing -Installing new GAF Timberline HDZ Architectural Color: CONFIRMED BY TEXT OR EMAIL -Installation of new roofing shingles to be in accordance with manufacturer’s specifications and state and local codes - Installing 6 galvanized nails per sheet of shingles - installing new GAF ridge vents on the top edge of the roof. Cobra Snow Country Cobra exhaust vent - installing new GAF Seal a ridge or timbertex Ridge caps - Clean up of project site and get all the nails using Magnetic Sweepers and disposal of all project waste. Home Exteriors LLC provides all labor, material, and dumpster.

Remove existing Roofing to wood, Clean the entire decking, and Back Nail all Plywood. If there is no existing plywood on the roof area it may need to be installed for an extra cost. Replace any rotted wood or damaged Plywood with cdx 1/2 plywood at $90.00 per sheet or $100 for 3/4 per sheet - Fascia wood boards $15.00 per linear foot and rafter Replacement or sistering $205.00 each - Above the cost of the roof. -Intalling New CDX plywood over the entire roof area: 1/2 3/4 - Tape all the joints and seams of the roof deck using Tite - Seal waterproof roof Deck Tape selfadhering, per code (4 inches). - install new aluminum drip-edge metal on all eaves of the roof deck. Color: White - Install new aluminum rake edge metal on all outside rake edges Color: white - Installing New Aluminum/galvanized steel flashing as needed - Install new Oatey vent pipe boot flashings - Installing 6 feet of new GAF WeatherWatch ice water shield all edges of the roof - Installing new GAF WeatherWatch ice water shield on walls, chimneys, around skylights and valleys - Installing new GAF WeatherWatch ice water shield over the entire roof decking - Installing new COPPER chimney Flashing -Installing new GAF Timberline HDZ Architectural Color: CONFIRMED BY EMAIL -Installation of new roofing shingles to be in accordance with manufacturer’s specifications and state and local codes - Installing 6 galvanized nails per sheet of shingles - installing new GAF ridge vents on the top edge of the roof. Cobra Snow Country Cobra exhaust vent - installing new GAF Seal a ridge or timbertex Ridge caps - Clean up of project site and get all the nails using Magnetic Sweepers and disposal of all project waste. Home Exteriors LLC provides all labor, material, and dumpster - Tools, equipment, surplus materials, shingles scraps, and debris resulting from the roof installation will be organized and cleaned up, or removed and disposed of by Home Exteriors LLC daily. Roof Color to be chosen by the owner.

Remove and replace 45 squares asphalt shingles.

Remove and replace with Timberline architectural shingles.

Re-roof.

Roof replacement.

Add To & Alter

Add To & Alter

Add To & Alter

Full roof replacement.

Building

Amendment 2 - Res

Home addition, kitchen expansion, and master bath extension. Interior renovation: 1 full bath renovation. State education fee paid: $58.50. Electrical: NEC. 3 bedrooms, 2.5 baths, new kitchen, dining room, family room, and foyer outlets to code; 30 recessed lights, 10 surface-mount lights, 6 exterior lights, 1 post light, 20 switches, 50 outlets, and 40 light outlets. Plumbing: First floor: 1 new sink and 1 new dishwasher. Second floor: move 2 water closets, 4 basins, and 1 tub and shower. Remove all old cast iron and waterpipe; install 2 new baths, 1 kitchen, and 1 gas stove. HVAC: IRC. Reconfigure existing ductwork only.

Building

Reroofing.

Roof replacement. State education fee: $7.20.

Roof replacement. State education fee: $2.08.

Roofing replacement. State education fee: $3.90.

Re-Roofing.

Re-Roofing.

Roofing replacement.

Roofing and Siding.

Building

Re-roof. State education fee paid: $18.20.

Remove and replace 43 squares asphalt shingles.

Roofing. LJ no paper folder created for this permit.