John Mirkov

Pool and/or Spa.

Construction of an inground reinforced concrete swimming pool with an automatic safety cover, pool equipment, and a terrace.

Construct inground swimming pool, spa, and required safety barrier. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee: $22.10. Electrical: Wire and bond 1 pool and spa with 1 automatic pool cover, 2 2 hp motors, 5 lights on a single-pole switch, 1 50-amp subpanel, 1 GFI outlet, 1 GFI outlet for lights, 1 salt chlorine generator, and 1 Aqualink RS-8 computer system.

Construct an inground swimming pool and required safety barrier in accordance with the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $22.10 on 5.21.18. Change of contractor; $40 per Sect. AG 106.1 CSBC and Sect. 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be performed, and components shall be replaced, by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer’s instructions and Connecticut State codes.

Construct an inground swimming pool, spa, and required safety barrier in accordance with the 2012 International Residential Code and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $39.00. Amendment #1, 8.6.18: $40 fee. Structural information for surrounding walls per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be performed, and components shall be replaced, by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and Connecticut state codes. Plumbing: Gas line to pool heater. Electrical: Using IRC code, wire and bond pool with spa; 2 2 hp motors, 4 lights, 1 GFI outlet, 1 50-amp subpanel, 1 GFI for lights, 1 pool cover.

Construct an inground swimming pool and required safety barrier in accordance with the 2015 International Residential Code and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $15.60.

Construct an inground swimming pool and required safety barrier in accordance with the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $41.60. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be performed, and they shall be replaced, by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer’s instructions and CT State codes.

Renovate existing swimming pool and install new equipment. State education fee paid: $10.14. Two hydrostatic drains installed to replace the single main drain–no submerged suction.

Construct an inground swimming pool and required safety barrier in accordance with the 2012 International Residential Code (IRC) and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $13.00.

Construct an inground swimming pool, spa, and required safety barrier under the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. Special education fee paid: $18.20. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of cover/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be performed, and the components shall be replaced, by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and Connecticut state codes.

Construct an inground swimming pool and spa with the required safety barrier, in accordance with the 2012 IRC and 2016 amendment. Fencing and safety devices must comply with the State Building Code.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $27.30. Per Sections AG 106.1 of the CSBC and 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs are completed. HVAC: Install gas piping for 2 pool heaters and hook up heaters supplied by the pool company. Electrical: Wire the pool with 10 Savi Melody Blanco LED lights, 2-speed pumps, 1 subpanel, 1 body jet, 1 Jandy RS, 10 computer, GFCI faceless, and GFI receptacles; provide all bonding and grounding and site lighting. Using IRC code, wire and bond the swimming pool with 2 2 hp motors, 1 pool cover with switch, 4 LED lights with niches, 1 GFI outlet, and 1 GFI for the pool light. Electrical (2): Install a 200-amp raintight subpanel for pool equipment.

Construct inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code and zoning. $15.34 state education fee paid. Per Sect. AG 106.1 CSBC and Sect. 4.3, APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs are completed.