Lionetti Michael

Construct an inground swimming pool and required safety barrier under the 2015 IRC and 2018 CT amendments. Fencing and safety devices must comply with the State Building Code per the 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee: $26. Electrical work under the IRC: wire and bond 1 pool with 1 automatic pool cover, 1 2 hp motor, and 4 lights on a single-pole switch; 1 50-amp subpanel; 1 GFI; 1 GFI outlet for lights; and 1 salt chlorine generator.

Construct inground swimming pool, spa, and required safety barrier. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee: $23.40. Plumbing: Gas line to pool heater.

Construct inground swimming pool, spa, and required safety barrier under the 2015 IRC and 2018 CT amendments. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. IRC–Inground Pool state education fee paid: $32.50. Electrical: Wire and bond 1 pool and spa with 1 automatic pool cover, 2 2 hp motors, 5 lights on a single-pole switch, 1 50-amp subpanel, 1 GFI outlet, 1 GFI outlet for lights, 1 salt chlorine generator, and 1 Aqualink RS-8 computer system.

Gas line to pool htr.

Construct an inground swimming pool and required safety barrier under the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $22.10. Amendment #1, 2.11.20: $40 fee for storm water drainage system change. Plumbing: gas line to pool heater. Electrical: 5 devices installed; using IRC code, wire and bond swimming pool with spa; 4 lights, 2 2 hp motors, 1 pool cover, 1 50-amp panel, 1 GFI outlet, and 1 GFI for lights.

With 2016 CT Amend. Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. $52.00 state education fee paid. This permit does not include a pre-fab spa, which requires a separate permit per Section AG 106.1 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of cover/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be performed, and components shall be replaced, by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and CT State codes. Electrical: Wire swimming pool; no pool light niches; GFI receptacle; GFI for pool motor. Plumbing: Connect gas line to pool heater.

With 2016 CT Amend. Construct inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. Zoning. Suction Outlet Certificate. Energy Code Affidavit. As-built piping diagram. Town Storm Drainage Manual. $39 state education fee paid. Plumbing: Run gas line and tie in pool heater, 406000 BTU. Electrical: Using IRC code, wire and bond spa with 2 2 HP motors, 2 LED lights (no niches), 1 spa cover, 1 GFI outlet, 1 GFI for lights, and 1 50-amp subpanel. Flood zone N.

Construct spa and required safety barrier under the 2015 IRC and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $11.70. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates, suction entrapment avoidance systems (including SRVS devices), and components shall be performed, and they shall be replaced, by a person licensed under a CT SPB or SB1 license, in accordance with applicable manufacturer’s instructions and Connecticut State codes. Electrical: Using IRC code, wire and bond spa with 2 LED lights (no niches), 2 24p motors, 1 pool cover, 1 50-amp subpanel, 1 GFI outlet, and 1 GFI for lights. Plumbing: Indoor gas line to pool heater. HVAC: Horizontal vent from pool heater to outside.

Construct inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. $26.00 state education fee paid. Zoning. Suction outlet certificate. Energy code affidavit. Town Storm Drainage Manual. Plumbing: gas line to pool heater; gas line to firepit. Electrical: using IRC code, wire and bond swimming pool; 4 lights, no niches; 2 2 hp motors, 1 500-amp subpanel, 1 GFI outlet, 1 pool cover motor, 1 GFI for lights.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $23.40. Per Sections AG 106.1 of the CSBC and 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs are completed.