Mario Hernandez

Electrical Work

Run 2/o for new panel in tenant space, refeed existing panel from new panel and add 2 electrical heaters.

Install supplemental baseboard electric heaters.

Demo shower lighting, install 6 new recess light fixtures, using existing g.l.

Install new standby 24 kW generator with ATS 200-amp, rated run cabling to side of house.

Install 24 kW generator at side of single-family residence.

Run 30-amp sup panel to new shed, install 12 circuit panel, lights to GFI outlet.

Install electric baseboard heat in all 3 apartments, with 1 thermostat to control the heaters in each apartment.

Add electric heating baseboard on all 5 apartments, run new 60-amp feeders for apartments 1,2,3.

Add 3 subpanels, add 3 electric heaters on each apt for bedroom, bathroom and kitchen, add one electric heater in common.fed from landlord panel.

Rough in bathroom, bedrooms, sitting room, kitchenette, and outside entrance.

Rough in for 12 outlets, add an EM light and exit sign, and install a 3-way switch for the existing 9 2-by-4-foot fixtures. Cut the lights over to the new 3-way switch at Nathan Hale.

Replace service for new 100 amp, new grounding system, and add 3 dedicated circuits for 3 120v sump pumps.

Replace service, new meter rocket, new riser, new panel, and new ground system.

Wire agpool to code.