Matthew K Lueders Dba Ocean North Pools LLC

Plumbing Work

Swimming Pool / Spa - Residential

Plumbing Work

Electrical Work

Electrical Work

New - Construction

Electrical Work

New - Construction

Plumbing Work

Swimming Pool / Spa - Residential

New - Construction

New - Construction

Plumbing Work

Swimming Pool / Spa - Residential

New - Construction

New -

New

Electrical Work

Swimming Pool / Spa - Residential

Electrical Work

Swimming Pool / Spa - Residential

Electrical Work

Swimming Pool / Spa - Residential

Electrical Work

Swimming Pool / Spa -

Electrical Work

Swimming Pool / Spa - Residential

Construction of a shotcrete 15' x 38' inground swimming pool. Adding 100 square feet of patio and constructing retaining walls.

Plumbing Work

Electrical Work

Swimming Pool / Spa - Residential

ELE

Swimming Pool / Spa -

Construction of an inground 20' x 40' inground swimming pool with 8' x 8' spa, 7' x 11' sundeck inside pool and automatic cover. NOTE: PER APPLICANT "we will not be doing the pergola" AS SHOWN ON THE SURVEY-TP.

New

Electrical Work

New

Electrical Work

Swimming Pool / Spa - Residential

Plumbing Work

Swimming New / Spa - Residential

Plumbing Work

PLU

New

Plumbing Work

Electrical Work

Swimming Pool / Spa - Residential

Electrical Work

Construction of an in-ground swimming pool under 600 square feet with an 8' x 8' spa outside. No patio work is mentioned.

Electrical Work

Electrical Work

New

Swimming New / Spa - Residential

Electrical Work

New

Swimming Pool / Spa - Residential

Electrical Work

Electrical Work

Electrical Work

New - Construction

New - Construction

Swimming Pool / Spa - Residential

Building Swimming Pool

Building Permit

PLU

ELE

Swimming Pool / Spa - Residential

PLU

ELE

Building Permit

12'x40' inground gunite pool.

Pool renovation: Resurface the pool, reset the pool coping, and upgrade the electrical system to comply with code. Trade permit required.

Install an above-ground pool and filter system. The pool is to act as its own barrier; no decking. Contractor must be in place before the permit can be issued. DN 6.22.20.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee: $15.08. Electrical: Install pool and apron bond; wire 1 pool pump, 1 pool heater, and 3 LED pool lights. Plumbing: Gas line to pool heater.

Construct an inground swimming pool, spa, and required safety barrier under the 2015 IRC and 2018 CT amendments. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. 2015 IRC state education fee paid: $22.10. Electrical: Furnish and install bond for pool and deck; wire 1 pool pump, 1 heater, 2 LED pool lights, 1 spa pump, 1 LED spa light, and 1 pool computer. Plumbing: Poly underground piping from gas meter to pool heater.

Construct an inground swimming pool and required safety barrier under the 2015 IRC and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $25.48. Electrical: Install bond for pool and deck. Wire 1 pool pump, 1 heater, and 2 LED lights. Plumbing: Poly gas line from gas meter to pool heater.

2018 CT Amend. Construct inground swimming pool, spa, and required safety barrier. Fencing and safety devices must comply with State Building Code per Section AG 106.1 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $25.22. Plumbing: poly underground piping from gas meter to pool heater.

Construct an inground swimming pool, spa, and required safety barrier. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $10.14. Electrical: NEC. Furnish and install bond for pool and deck; wire the following equipment: 1 pool pump, 1 pool heater, 3 LED lights.

Construct an inground swimming pool and spa with a required safety barrier. 2015 IRC/2018 CT Amend. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Sect. 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $13.78. Electrical: NEC. Furnish and install bonding for the pool and deck; wire 2 pool pumps, 1 heater, 2 LED lights, 1 spa light, and 1 pool computer.

Install a pressure-treated accessible ramp and railing.

Construct inground swimming pool, spa, and required safety barrier in accordance with the 2015 IRC and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee: $24.96. HVAC: Hook up pool heater. Electrical: Furnish pool and deck bond; wire 2 pumps, 1 heater, 3 LED lights, and 1 auto cover.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $13.78. Per Sect. AG 106.1 CSBC and Sect. 4.3, APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be performed, and covers/grates and components shall be replaced, by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and CT State codes.

Bldg Swim Pool