Oceanview Pool and Patio LLC

Pool and/or Spa.

Pool and/or Spa.

Plumbing Work

Install an inground 20' x 40' swimming pool with an interior spa. An automatic pool cover will serve as the required barrier.

Alteration

New Pool, Spa, and Patios.

Electrical Work

Alteration

Electrical Work

Pool and/or Spa.

Pool and/or Spa.

Pool and/or Spa.

Swimming Pool / Spa - Residential

Swimming Pool / Spa - Residential

Demolish

Pool and/or Spa.

Pool and/or Spa.

Pool and/or Spa.

Pool and/or Spa.

Electrical Work

Pool and/or Spa.

Pool and/or Spa.

Swimming New / Spa - Residential

Pool and/or Spa.

Swimming New / Spa - Residential

Install an inground concrete 20' x 50' swimming pool with an interior 7' x 8'6" spa and an automatic cover. Approximately 845 square feet of patio to be installed by others. Oceanview Pool and Patio will be constructing the pool only. All other work is not included.

Pool and/or Spa.

Swimming Pool / Spa -

Pool and/or Spa.

Pool and/or Spa.

Install inground 40’X20’ and spa 6-by-10-foot’ Gunit with auto cover.

Pool and/or Spa.

Pool and/or Spa.

Pool and/or Spa.

Install inground (7’X11’) concrete spa.

New - Construction

Install 8'X15' outdoor spa.

New - Construction

Swimming Pool / Spa - Residential

Install a concrete inground pool. E22-0453-Ele Alt residence: Wire a concrete inground pool.

Building Permit

Building Permit

Inground Pool and Spa.

18'x36' inground pool and 6'6"x10' spa.

16'x40' Inground Pool.

Inground Pool.

Inground Pool.

Inground pool and interior spa.

Inground Pool.

Inground Pool with Spa.

Inground Pool.

Construct an inground swimming pool, spa, and required safety barrier in accordance with the 2015 IRC and 2018 CT amendments. Fencing and safety devices must comply with the State Building Code per the 2018 CSBC and Section 4.3 of APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee: $39.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. Electrical: Wire pool.

2018 CT AMEND Construct Inground Swimming Pool and Required Safety Barrier. Fencing/safety devices must comply with State Building Code PER 2018 CSBC and Sect. 4.3, apsp-7, any pool, spa, or hot tub with a broken, loose or missing suction outlet cover shall be immediately placed out of service until repairs or replacement is completed with an approved outlet cover. State ed fee $23.40.

Construct an inground swimming pool, spa, and required safety barrier under the 2015 IRC and 2018 CT amendments. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $36.40.

Inground Pool with Spa.

In-ground pool with spa.

In-ground pool with spa.

Grill station and fire pit.

Pool and spa with fence.

Construct an inground swimming pool, spa, and required safety barrier under the 2015 IRC and 2018 CT amendments. Fencing and safety devices must comply with the State Building Code per the 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $39. Electrical: wire pool. IRC plumbing: move water service line (in way of pool); install gas line for 2 pool heaters.

New inground swimming pool. State education fee paid: $26.00. Electrical: Wire pool. Two motors, 4 pool lights.

2015IRC/2018 CT AMEND Construct Inground Swimming Pool, Spa and Required Safety Barrier. Fencing/safety devices must comply with State Building Code PER SECT. AG 106.1 CSBC and Sect. 4.3, apsp-7, any pool, spa, or hot tub with a broken, loose or missing suction outlet cover shall be immediately placed out of service until repairs or replacement is completed with an approved outlet cover. State ed fee paid $39 electrical: wire pool, 2 motors., 4 pool lights PLUMB: install 2" underground gas line from meter to pool heater. IPC.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code per 2018 CSBC and Section 4.3, APSP-7. Any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. State education fee paid: $26. Electrical: wire pool.

Construct an inground swimming pool, spa, and required safety barrier under the 2015 IRC and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $18.20. Plumbing: gas piping for pool heater. Electrical: 6 devices installed; wire pool, 2 motors, and 4 pool lights.

Construct an inground swimming pool, spa, and required safety barrier under the 2015 IRC and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $20.80. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates, suction entrapment avoidance systems [including SRVS devices], and components shall be performed, and these items shall be replaced by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and Connecticut State codes.

Construct an inground swimming pool, spa, and required safety barrier in accordance with the 2015 International Residential Code (IRC) and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $15.60.

Construct an inground swimming pool and required safety barrier in accordance with the 2012 IRC and 2016 CT amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $15.60. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates, suction entrapment avoidance systems (including SRVS devices), and components shall be performed, and they shall be replaced by a person licensed under a CT SPB or SB1 license, in accordance with applicable manufacturer's instructions and CT State codes.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $11.70. Per Section AG 106.1 CSBC and Section 4.3, APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 standard, periodic evaluation, testing, and maintenance of covers/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be performed, and they shall be replaced, by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and CT State codes.

Construct an inground swimming pool, spa, and required safety barrier in accordance with the 2015 International Residential Code and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $16.90. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates, suction entrapment avoidance systems (including SRVS devices), and components shall be performed, and they shall be replaced by a person licensed (CT SPB or SB1 license) in accordance with applicable manufacturer's instructions and Connecticut State codes.

2012IRC/2016 CT AMEND Construct Inground Swimming Pool and Required Safety Barrier. Fencing/safety devices must comply with State Building Code. State Ed Fee paid. $18.20 PER SECT. AG 106.1 CSBC and Sect. 4.3, apsp-7, any pool, spa, or hot tub with a broken, loose or missing suction outlet cover shall be immediately placed out of service until repairs or replacement is completed with an approved outlet cover. In accordance with Section 6.1 of APSP-7 Standard, periodic evaluation, testing and maintenance of cover/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be evaluated, maintained and replaced by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and CT State codes Amend #1: 7.12.17 val $50,000 fee $703 renovate rear and pool patio.

Construct an inground swimming pool and required safety barrier in accordance with the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $15.60. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates, suction entrapment avoidance systems (including SRVS devices), and components shall be evaluated, maintained, and replaced by a person licensed (CT SPB or SB1 license) in accordance with applicable manufacturer's instructions and Connecticut state codes.