Paul M Bany

Plumbing Work

HVAC Work

In garage. To G. S. R will shingle Driftwood. Ridge Vent. Cooper. The Tongue and include fill and vent piping, alarm whistle and gauge. The entire roof of the home in Owens Corning Duration in The customer currently has Vented Soffits and G. S. R will be putting in a The customer has 1 Brick Center Chimney that will be Flashed in customer currently has 3 vent pipes. The customer currently has Groove wdecking in fair condition. The customer is aware of any.

Plumbing Work

HVAC, Geothermal, Chimney liners & Oil Tank Permit WILTON

HVAC Work

Direct replacement in the basement : cut clean, inspect and remove 1 275-gallon tank. Install 1 275 roth double bottom steel tank in the basement to include fill piping, vent, vent alarm and gauge.

Direct replacement in the basement : cut clean, inspect and remove 1 275-gallon tank. Install 1 275 granby standard steel in the basement to include fill piping, vent, vent alarm and gauge.

Direct replacement: remove (1) above-ground tank and install (1) 275 EcoPlus poly double-bottom steel tank on concrete pads, including all fill piping, vent, vent alarm, and gauge.

Cut, clean and inspect 1 275 gallon above ground storage tank in basement, install 1 275 ganby double bottom steel tank in basement to include fill piping, vent, vent alarm and gauge.

HVAC Work Plumbing

Cut, clean inspect, and remove 1 275-gallon tank in the basement. Install 1 330 gallon granby, ecoguard double botton steel tank in same location to include fill piping, vent, vent alarm an gauge.

Cut, clean inspect and remove 1 275-gallon tank located in the basement. Fill and vent piping will be removed.install 1 275 granby eco plus poly coated double bottom tank on the side of the house on concrete pads to include fill piping, vent alarm and gauge.

Cut, clean, inspect, and remove (1) 275 above-ground storage tank located in the basement. Fill and vent piping will be removed.

Cut, clean, inspect and remove 1 unknown gallon underground storage tank located on the left side of the house fill and vent piping will be removed. Soil sample will be taken from the tank grave. Install 1 275 grandby ecoguard double bottom tank in the basement to include fill piping vent, vent alarm and gauge.

Remove 1 275 gallon above ground storage tank in the basement. Install 1 275 granby ecoguard double bottom teel tank in the basement to include fill piping, vent, vent alarm and gauge.

Install one 275 Granby Ecoguard double-bottom steel tank on the side of the house on concrete pads, including piping, a vent, a vent alarm, and a gauge.

Direct replacement in basement: cut, clean, inspect and remove 1 275 gallon above ground tank - Install 1 275 gallon ROTH tank to include fill piping, vent, vent alarm and gauge.

Direct replacement in the basement: cut, clean, inspect, and remove 1 275-gallon above-ground tank; install 1 275 ROTH double-wall tank, including fill piping, vent, vent valve, and gauge.

HVAC

Direct replacement of tank in workshop off the garage-cut clean inspect and remove 1 275 gallon. Aboveground tank and install 1 275 ecoguard double bottom tank -includes fill piping, vent, vent alarm and gauge.

Direct replacement in the garage: cut, clean, inspect and remove 1 275 gallon above ground tank - install 1 275 Ecoguard double bottom tank to include fill piping, vent alarm and gauge - install 1 lag bolt bollard.

Direct replacement on the left side of the house-cut, clean, inspect and remove 1 275 gallon above ground tank - install 1 275 ROTH tank on concrete pads on the left side of the house to include fill piping, vent, vent alarm and gauge.

Direct replacement in the basement: cut, clean, inspect and remove 1 - 275 gallon above ground tank - install 1 - 275 Ecoguard double bottom tank to include fill piping, vent alarm and gauge.

AG replacement: cut, clean inspect and remove 1 275 gallon AG storage tank, install 1 275 double wall steel tank in basement to include fill piping, vent, vent alarm and gauge.

Cut, clean and inspect and remove 1 275 gallon AG storage tank in basement and 1 double bottom steel tank in basement to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect and remove 1 275 gallon AG storage tank in basement, install 1 double bottom steel tank in basement to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect and remove 275 gallon AG storage tank and install 1 275 gallon double bottom steel tank in basement to include fill piping, vent, vent alarm and gauge - direct replacement in basement.

Cut, clean, inspect and remove 1 550 gallon underground tank on right side of house Install 1 275-gallon tank on concrete pads next to chimney include fill piping, vent, vent alarm and gauge.

Direct replacement in basement - cut, clean, inspect and remove 1 275 gallon above ground tank and install 1 175 double bottom steel tank in basement to include fill piping - vent, vent alarm and gauge.

Cut, clean, and remove (1) AG storage tank in the basement and install (1) double-bottom steel tank, including fill, vent, vent alarm, and gauge.

Cut, clean, inspect, and remove (1) AG storage tank located on the side of the house, and install (1) 275-gallon AG storage tank on concrete pads, including fill piping, vent, vent alarm, and gauge.

Cut, clean, inspect, and remove (1) 275 gallon AG tank in basement; install (1) 275 double bottom steel tank in basement, including fill piping, vent, vent alarm, and gauge.

Plumbing Work

AG tank replacement - direct replacement in basement - cut, clean, inspect and remove 1 275 gallon AG storage tank, install 275 gallon AG tank in basement to include fill piping, vent, vent alarm and gauge.

HVAC Work

Cut, clean and inspect 1 275 gallon AG tank in basement, direct replacement: install 1 275 gallon AG storage tank in basement to include fill piping, vent, vent alarm and gauge - Apt A.

Cut, clean and remove 1 AG storage tank in basement and install 1 275-gallon tank in basement to include fill pipe, vent alarm, and gauge.

Cut clean and inspect 1 275 gallon AG tank in basement, direct replacement - install 275 gallon AG storage tank in basement to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect and remove 1 275 gallon AG tank, install 1 275 tank in basement to include fill piping, vent alarm and gauge.

Cut, clean, inspect and remove 1 175 underground storage tank located at front yard, soil sample will be taken from under grave and under lines.

Cut, clean, inspect and remove 1 275-gallon tank from basement and install 1 175 double bottom steel tank in basement to include fill, piping, vent, vent alarm and gauge.

Above ground tank replacement - cut, clean, inspect and remove 1 AG tank in basement and install 1 275-gallon tank in basement to include fill piping, vent, vent alarm and gauge.

Above ground tank replacement-cut, clean and remove 1 275 gallon above ground storage tank. Install 1 275 Granby Ecoguard double bottom steel tank in the basement to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect and remove 1 275-gallon tank from inside shed, install 1 275 ROTH tank outside the shed on concrete pads to include, fill piping, vent, vent alarm gauge.

Cut, clean, inspect and remove 1 550 gallon underground tank located side of house in same location, install 1 275 gallon AG tank on pads outside to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect, and remove (1) AG storage tank located on side of house. Fill and vent piping will be removed.

Cut, clean, inspect and abandon in place 1 unknown size underground storage tank soil samples will be taken from under the tank/lines for analytical data; backfill with gravel, install 1 double bottom steel tank on right side of house on concrete pads to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect and remove 1 275.

Cut, clean, inspect and remove 1 275 gallon AG tanks from basement, same location install - 1 275 gallon AG tank in basement to include fill piping, vent, vent alarm and gauge.

HVAC Work

HVAC Work

Install a temporary tank due to a leaking tank in the basement.

Cut, clean, inspect and remove 1 275 gallon AG tank from basement, same location install 1 275 AG tank in basement to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect and remove 1 AG storage tank from backyard and install new AG tank on concrete pads to include fill piping, vent, vent alarm and gauce.

Cut, clean and remove 1 275 gallon AG tank from basement - same location, install 275 gallon AG tank in basement to include fill piping, vent, vent alarm and gauge.

Cut, clean and remove 1 275 gallon AG tank from basement - same location, install 275 gallon AG tank in basement to include fill piping, vent, vent alarm and gauge.

Cut, clean and remove 1 AG storage tank from basement, install 1 275 gallon ROTH AG tank in basement to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect and remove 1 AG storage tank in basement, install 1 175 gallon granby ecoguard double bottom steel tank outside of garage on pads to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect and remove 1 275 gallon AG storage tank in basement, install 275 double wall tank in basement to include fill, piping, vent, vent alarm and gauge.

Cut, clean, inspect and remove 1 275 gallon AG storage tank in basement, install 1 275 bottom steel tank in basement to include fill, piping, vent, vent alarm and gauge.

Cut, clean and inspect and remove 1 AG storage tank in basement, install 1 275 bottom steel tank in basement to include fill piping, vent, vent pipe alarm and gauge.

Cut, clean, inspect and remove 1 275 gallon AG tank that is leaking and install new 275 AG storage tank in basement to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect, and remove 1 550-gallon underground storage tank located on the left side of the house. Remove fill and vent piping. Take soil samples.

Cut, clean, insect, and remove (1) AG storage tank in basement; install (1) 275 gallon tank in basement, including fill piping, vent, vent alarm, and gauge.

Cut, clean and remove 1 AG storage tank in basement and install 1 275 steel tank in basement, to include fill piping, vent, vent alarm and gauge.

Cut, clean, inspect, and properly dispose of a 275-gallon above-ground oil tank in the basement.

Cut, clean, inspect and remove 1 AG storage tank in basement and 1 Granby coated steel tank, 275 gallons in the basement to include fill piping, vent, vent alarm and gauge.

HVAC Work

HVAC Work

HVAC Work

Install 1 330 gallon AG oil tank in basement, piping, fill vent, gauge and alarm whistle are included. Cut clean, remove and dispose of old tank from the garage.

Cut, clean, inspect and remove 1 AG storage tank from the basement, install 275 tank in basement to include fill piping vent, vent alarm and gauge, tank has a slight drip.

HVAC Work

Cut, clean, inspect and remove 1 275 gallon AG tank that is leaking, install 1 275 roth AG storage tank in basement to include fill piping, vent, vent alarm, and gauge.

Cut, clean, inspect and remove 1 275 gallon AG tank that is leaking, install 1 275) AG storage tank in basement to include fill piping, vent, vent alarm and gauge.

Install 1 275 gallon AG oil tank to include piping, fill, vent, gauge, alarm whistle and concrete pads - Abandon 1 550 gallon underground oilk tank and excavate tank top, cut, clean and inspect interior of tank.

Cut, clean, and properly dispose of (1) 550-gallon UST located on the side of the house; fill/vent piping will be removed.

Cut clean and remove 1 275 gallon above ground oil tank from basement. Install 1 275 ROTH above ground oil tank on right side of house on concrete pad. To include fill/vent piping, alarm and gauge.

Plumbing Work

Cut, clean and remove 1 275 AG oil tank from basement, install 1 275 AG oil tank in basement - include fill/vent piping, gauge and alarm.

HVAC

Cut, clean and inspect abandoned 1 550 gallon underground oil tank from backyard.

Cut, clean, and remove (1) 275-gallon oil tank from the basement.

Cut, clean and remove 1 275 gallon aboveground oil tank in basement, install 275 gallon AG oil tank in basement - to include fill/vent piping, alarm and gauge.

HVAC Work

Remove the existing above-ground oil tank in the first-floor storage space and install a new above-ground oil tank on the left side of the home.

Remove the existing above-ground tank and replace it with an equivalent 275-gallon tank in the basement.

Oil tank replacement in basement.

Cut, clean and remove 1 275 gallon above ground oil tank from basement and install 1 275 gallon above ground oil tank in basement.

Cut, clean, and remove (1) 330 gal above-ground oil tank from the basement.

Cut, clean and remove one 275 gallon oil tank from crawl space, install 1 275 gallon walled roth tank in the basement.

Install a new 275-gallon above-ground oil tank at the side of the single-family residence.

Cut, clean and remove 1 275 gallon above ground oil tank from the crawl space. Install 1 275 gallon standard granby oil tank in the boiler room.

Mechanical - replacement of 275gal oil tank in basement.

Mechanical: Remove the existing heating oil tank from the crawl space and install a new tank in the garage.

Mechanical- replacing/re-piping 2 275 gallon oil tanks above ground.

Mechanical - install 275 gallon oil tank - basement of rear cottage.

Mechanical — replace existing oil tank.

Mechanical: Remove and replace the oil tank in the basement.