R. W. Haggerty Pools

Install 18’X37’ concrete pool with patio and retaining wall.

Install inground pool – GUNITE – 20’X40’ and 8’X8’ spa.

Construct 10.8’X13.2’ inground pool Gunite; E22-0544-Ele Alt residence: Wiring for pool and grounding.

Install 12'X24' inground pool and 6-by-9-foot spa; E22-0175-Ele Alt residence: Pool/spa combo, 2 pumps, cover, heater, controls and 4 LED lights.

Install 15'X35' in ground concrete pool; E21-0277-Ele Alt residence: Basic pool: 1 pump, cover, 3 LED lights and heater; H21-0424-Mech No Fee: Installation of 500 underground liquid propane tank on left rear of residence and underground gas line from tank to new pool heater.

Construct inground swimming pool. State education fee paid: $15.34. Fencing and safety devices must comply with the State Building Code. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of cover/grates, suction entrapment avoidance systems (including SRVS devices), and components shall be performed, and they shall be replaced by a person licensed (CT SPB or SB1 license) in accordance with applicable manufacturer’s instructions and Connecticut State codes.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $15.08. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates, suction entrapment avoidance systems (including SRVS devices), and components shall be performed, and they shall be replaced by a person licensed under a CT SPB or SB1 license, in accordance with applicable manufacturer’s instructions and CT State codes.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $11.70. Electrical: 6 devices; 2 pool lights, 2 pool equipment; 1 pump, heater, 2 lights, automatic cover. Electrical (2): 20 devices installed; install 12 volti lighting around the pool and front. Plumbing: Run gas line to pool heater.

Install dual main drain in deep end floor of existing swimming pool. State ed fee paid $. 16.

Construct an inground swimming pool and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $16.90. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates, suction entrapment avoidance systems (including SRVS devices), and components shall be performed, and they shall be replaced by a person licensed under a CT SPB or SB1 license, in accordance with applicable manufacturer’s instructions and CT State codes. Plumbing: Gas line to pool heater and barbecue. Electrical: 1 heater, 1 outlet, and 3 pool lights; pool and spa combo, control system, 2 pool lights, 1 spa light, 2 pumps, and heater.

Construct an inground swimming pool, spa, and required safety barrier. Fencing and safety devices must comply with the State Building Code. State education fee paid: $16.90. Electrical: pool and separate spa, 3 pumps, 2 heaters, control system, 2 automatic covers, 2 pool lights, and 1 spa light. HVAC: install 400 k pool heater.

Renovate existing swimming pool; install dual man drain, re-ground deck, and install new heater. State education fee paid: $13. Electrical: renovation, ground deck, new LED MicroBrite lights, and cleanup slab electric.

2015IRC/2018 CT AMEND Construct Spa and Required Safety Barrier. Fencing/safety devices must comply with State Building Code. State Ed Fee paid. $10.92 PER SECT. AG 106.1 CSBC and Sect. 4.3, apsp-7, any pool, spa, or hot tub with a broken, loose or missing suction outlet cover shall be immediately placed out of service until repairs or replacement is completed with an approved outlet cover. In accordance with Section 6.1 of APSP-7 Standard, periodic evaluation, testing and maintenance of cover/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be evaluated, maintained and replaced by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and CT State codes PLUMB: install gas piping and venting to new pool spa heater electrical: 5 devices installed; 2: pool equipments, 1 pool heater; spa: 2 pumps, heater, automatic cover, 1 light.

Construct an inground swimming pool and required safety barrier in accordance with the 2015 IRC and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $20.80. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates, suction entrapment avoidance systems (including SRVS devices), and components shall be performed, and they shall be replaced, by a person licensed (CT SPB or SB1 license) in accordance with applicable manufacturer’s instructions and Connecticut State codes.

Construct an inground swimming pool and required safety barrier under the 2012 International Residential Code and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $16.90. Per Section AG 106.1 of the Connecticut State Building Code and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 Standard, periodic evaluation, testing, and maintenance of covers/grates and suction entrapment avoidance systems (including SRVS devices) and components shall be performed, and they shall be replaced by a person licensed under a CT SPB or SB1 license, in accordance with applicable manufacturer's instructions and Connecticut State codes.

Construct an inground swimming pool and required safety barrier under the 2012 IRC and 2016 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $20.80. Under Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs or replacement are completed with an approved outlet cover. In accordance with Section 6.1 of the APSP-7 standard, a person licensed under a CT SPB or SB1 license shall evaluate, maintain, and replace covers/grates, suction entrapment avoidance systems (including SRVS devices), and components through periodic evaluation, testing, and maintenance, in accordance with applicable manufacturer's instructions and Connecticut state codes.

Construct an inground swimming pool and required safety barrier under the 2015 IRC and 2018 Connecticut amendments. Fencing and safety devices must comply with the State Building Code. State education fee paid: $16.90. Electrical: 3 pool equipment, 3 lights; pool/spa: 2 pumps, 1 heater, 2 pool lights, 1 spa light, automatic cover and control system. Plumbing: Install 1 1/2 underground gas pipe, approximately 130 ft, for pool heater and heater.

Remove single main drain in floor of Swimming Pool; Install new dual main drain system infloor of Swimming Pool 3 ft. Apart. State Ed. Fee paid.: $. 26 PER SECT. AG 106.1 CSBC and Sect. 4.3, apsp-7, any pool, spa, or hot tub with a broken, loose or missing suction outlet cover shall be immediately placed out of service until repairs or replacement is completed with an approved outlet cover. In accordance with Section 6.1 of APSP-7 Standard, periodic evaluation, testing and maintenance of cover/grates and suction entrapment avoidance systems [including SRVS devices] and components shall be evaluated, maintained and replaced by a person licensed [CT SPB or SB1 license] in accordance with applicable manufacturer's instructions and CT State codes.

Spa/hot tub equipped with an approved safety cover, with a raised deck or platform surrounding the spa. Safety barrier: wire and aluminum. Bull Frog Spa/Hot Tub model A8 in compliance with UL1563. State education fee paid: $1.30. Per Section AG 106.1 of the CSBC and Section 4.3 of APSP-7, any pool, spa, or hot tub with a broken, loose, or missing suction outlet cover shall be immediately placed out of service until repairs are completed.