Raymond G Lada

Plumbing/Gas Permit

Run approximately 100' of 1 1/4 IPS plastic to the pool heater.

Plumbing Work

Run 10' of pipe to the fireplace.

Run 25' of pipe to the pool heater and 30' of pipe to the fire pit.

Run 10' of 1" pipe to pool heater.

Run 80' of 1 1/4' trac pipe to the pool heater.

Run 15' of pipe to the pool heater.

Run 50' og 1/2 plastic to pool heater.

Run 40' of 1/2 plastic to pool heater.

Run 25' of 1/2 copper to pool heater.

Run 75' of 1/2" plastic to pool heater.

Run 15' of 1/2 trac pipe to log set.

Run 15' of 1/2 plastic to the pool heater.

Run approximately 110' of 3/4" plastic to pool heater.

Run 20' of 1/2 plastic to the pool heater.

Run 20' of 1/2 Replace the copper to pool heater hotwater heater. The new one is Rheem Performance Model number.

Run approximately 50' Replace the oil tank. Install and vent pipes. On suction oil of 1" 1/4 trac pipe to pool heater existing steel 275 gallon oil tank with a new Roth double wall 275 gallon new 2" fill New roth tank gauge, Roth vent alarm and Roth duplex. Inline fire valve lines.

Run 85' of 1 1/2 plastic to the generator.

Run 20' of 1/2" copper to the pool heater.

Run 15' of 1" pipe to the pool heater.

Mechanical—pool heater.

Run 12' of 1" pipe to the pool heater.

Run 70' of 1/2" plastic to pool heater.

Run 20' of 1/2" trac pipe to fireplace.

Run 75' of 1/2" plastic to pool heater.

Run 10' of 1/2" tubing to the pool heater.

Run 75' of 1 1/4 trac pipe 40' of 1 1/4 plastic to pool heater.

Run 15' of 3/4 pipe to the pool heater.

Plumbing Work

Run plastic to pool heater.

Run pipe to manifold job to fireplace and stove.

Run 30' tubing to fireplace.

Run 10' of 1/2" pipe to the fireplace.

Plumbing Work

Run 80' of plastic to the pool heater.

Run pipe to pool heater.

Run 60' of 1 1/2" plastic from meter to house.

Run 140' of 2/4" plastic to pool heater, 35' of 3/4" plastic to generator and 80' 3/4" plastic to fire pit.

Run 40' plastic from the LP tank to the pool heater.

Run a gas line to the boiler and furnace.

Run 15' of 1" pipe to the pool heater.

Piping for a new pool heater from the existing gas connection.

Run 25' of 1/2" plastic to pool heater.

Run 20" of 1/2 plastic to generator and pipe to fireplace.

Plumbing Work

Run 60' of 34 plastic from tanks to pool heater.

Run 65' of ya" plastic to pool heater.

Run approximately 20' of 1/2 copper to the pool heater.

Run 30' of 3/4 blackpipe to generator.

Run line to high-pressure pool heater.

Run a 20' 1/2 copper line to the pool heater.

Install pool heater.

Run a gas line to the pool heater.

Run 9' of 1/2 to heater location.

Run 25' of 1/2" line from the tank location to the pool heater outside, along the house.

Mechanical: run line to pool heater.

Mechanical: Run a line from the existing tank to the pool heater.

Mechanical: Run line to pool heater.

Mechanical: Run a line along the side of the house to the pool heater.

Run 10 ft. Of 3/4 plastic from stub out to P/H at 2 psi; black pipe spa heater.

Tie into the line at the meter and run 30 ft. Of 1 1/4" plastic to the pool heater.

Run 200 ft of 3/4" plastic to pool heater.

Tie into natural gas line. Run approximately 60' of continuous line to the grill and fire pit. Add approximately 40" of 3/4 IPS plastic to each unit.

Run 40 ft. Of trac pipe to pool heater.

Run 2 psi counterstrike line from meter to grill.

Run approximately 35 ft. Of 3/4" counterstrike line to fire log set.

Run approximately 30 ft. Of 1" counterstrike line to spa heater.

Tie into line on job; run counterstrike, apply 20 ft to fireplace logs.

Run approximately 6 ft. Of 7" black pipe from meter to pool heater.

Mechanical — pool heater.

Mechanical - tie into line at meter (outside rear) - rung line to log set and pressure test line.

Gas pipe to generator. Receipt 18-1883 for $40 paid.

Gas lines to 2 fireplaces for installation of 2 vented log sets.

Run line from meter set to stove.

Run 3/4 gas line approximately 25 ft. To the house and approximately 150 ft. Of 3/4 IPS line for future use in the yard.

Gas line to generator. Receipt 19-0288 for $40 paid.

Mechanical work on gas lines.

Mechanical: Run line to pool heater.

Mechanical: Run line from tank location to pool heater and to the house.

Run 8 ft. Of 1 1/4 IPS plastic to pool heater.

Run 1 1/4 line from house to pool heater.

Run approximately 125 ft. Of 3/4 IPS line to pool heater.

Run and apply 50 ft. Of 1 1/4 pipe to pool heater.

Run 1 1/4 pipe from the meter set to the manifold in the basement and 2 boilers; extend the line approximately 12 ft. To the existing generator.

Run 2" IPS line from meter to pool htr., approximately 140 ft.

Tie into the line on the job; run 1" pipe to the pool heater.

Run 120 ft. Of IPS line to pool htr. At 2 PSI.

Gas pipe to pool heater: run approximately 40 ft. Of 1" IPS line to pool heater; line on job to fire pit: approximately 20 ft.

Run approximately 25 ft. Of 1/2 copper to the pool heater.