Reinaldo Desousa

Full electrical Roof Replacement-Remove Replace any necessary two rows around chimneys, other roof Water Barrier) Underlayment aluminum Shingles with architectural maintain consistent ridges and Remove existing aluminum wiring to code with 200Amp service, all appliances existing roofing materials to expose wood decking.- rotten plywood.(up to 2 sheets)-Re-secure all wood decking as with galvanized ring shank nails to ensure a stable roofing system.-Install of Ice and Water Shield Barrier: 6' from all drip edge 3' in valleys, and 18" skylights, roof/wall intersections including dormers, and any penetrations.-All joints on the entire roof deck (not covered in Ice & will be taped 4" Self-Adhering Flashing tape.-Install Synthetic on all decking (not covered in Ice and Water Barrier).-Install new F-5 drip and rake metal along all eaves and rakes of the roof.-Install Starter Fast-lock sealant along entire outside perimeter of roof.-Install new shingles with 6 nails per shingle.-Install new rigid Ridge Vent(s) to attic ventilation.-Install purpose-made Ridge Shingles on all hips.-Remove existing vent pipe boot(s) and replace. (if Applicable)- box vent(s) and replace with new black UV protected LOMANCO 750 box vent(s), (if applicable).-Install new lead/aluminum step flashing and.

Install 48 roof-mounted solar panels, 20.16 kW DC. No structural work. 48 Enphase integrated microinverters.

(Model SPR-M440-H-AC) modules with 32 Enphase IQ7HS integrated microinverters.

Rewire fire damage to first floor.

18.71 kW DC roof mounted solar-43 of the Sunpower 435 W modules with 43 enphase IQ7HS integrated microinverters.

Wire a 200 kW solar system, UI #250521.