Robert T McColl

Install 1-inch black gas pipe from the meter to the generator, 5 ft.

HVAC Work

Gas pipe generstor to gas meter.

Replace existing.

Run 10ft 1 inch black pipe from generator to meter.

Run 25Ft 1 inch black pipe from meter tp the generator.

Run 15 ft 1 inch black pipe from generator to gas meter.

Run 10' of This project shingles and installation, waterproofing roofing felt, asphalt shingle surface. Roof vents, to ensure replaced, includes work 3/4" black pipe from generator to existing L/p hook up involves a full roof replacement including tear-off of existing laminated any additional roofing layers. The roof deck will be prepared for new with damaged or soft plywood sheathing replaced as needed. New materials will be installed, including ice and water shield, 30 lb and seam tape for added protection against leaks. A new laminated roofing system will then be installed across the entire roof ventilation will be replaced, including ridge vent and turtle-style roof proper airflow. All flashing components will also be removed and including chimney flashing, pipe boots, and drip edge. The project on a multi-story roof structure, which requires additional labor and.

Fittings.

Install a 120gal Upgrading service liquid propane tank, run 20ft of 3/4in black pipe to 200amp, cutting back damaged branch circuits and terminating.

Run 10' of 3/4" black pipe from new generator to gas meter.

Run 10' of Install 14kw 3/4" black pipe from new generator to gas meter Generac generator with 200amp ATS for partial home. Located at right.

Run 10' of Install Generac 3/4" black pipe from gas meter to new generator. 10kw partial-home generator with 100-amp ATS at right side of house.

3/4-inch black pipe to woks, tapping off existing N/G line.

Run 15' of 1" black pipe from the gas meter to the new generator.

Propane Tank

Generator.

Plumbing Work

Run 20 ft of 1 inch black pipe to gas meter and gen.

Plumbing Work

Install (1) 120 gallon AG tank and run black pipe gas to generator.

Run 50 ft of 1-inch black pipe and connect to the generator.

600 Run 30 feet of 1 inch black pipe from gas meter to new generator.

Run 20' of 11" black pipe gas line from the meter to the generator.

Run black pipe from the existing LP tank to the generator.

Run black pipe from the existing LP tank to the generator.