Ronald L Smith

HVAC, Geothermal, Chimney liners & Oil Tank Permit WILTON

Ductwork removed abou 125 sf of walls in unit, re-insulate, re-.

Up air damper. Re-roof at whole house. Remove existing archtectural shingles and install new.

Ductwork. Furnace Installation in the basement. 3 zones. Of new ductwork for new addition. 9 supply's. Bath fan, Kitchen make.

HVAC, Geothermal, Chimney liners & Oil Tank Permit WILTON

HVAC

HVAC Work

HVAC, Geothermal, Chimney liners & Oil Tank Permit WILTON

HVAC Work

New ductwork.

Run gas pipe from basement to attic.

Installation of 4 -4000 BTU gas furnaces with 2.5-ton coil and condensers, with new ductwork.

2 gas furnace 60,000 BTU 92% 2 air conditioning coil 3-ton, 3 condensing unit 3-ton, all duct work.

Replacement of existing indoor oil tank, 275 gallons.

Installation of air handlers, condenser, ductwork, boiler, indirect water heater, refrigeration lines, and condensation lines.

HVAC Work

HVAC Work

Ductwork. The Trading The unit The unit 2 zones Post will be installing a Wood Burning Insert at the Carley Residence. Will be vented into a Chimney using approved stainless steel flex pipe. Will be installed to local and national codes, and manufacturer.

Install 2 gas furnaces with air-conditioning condenser ductwork for 4 zones, 80.000 and 60000 BTU.

Relocated existing indoor unit for heating and cooling will convert to hydro air for the whole house, with new ductwork for 2 zones, 2 bathroom fans, dryer exhaust, a kitchen hood with make-up air, and relocation of the existing condensing unit.

Ductwork.

Installation 3 carrier gas furnaces 60.000 btuh 92% 3 tons blower indirect vented outside, installation of 3 carrier condensing units 2.5 tons 14 seer 208/230/vac single stage we have to do all the ductwork, installation supply and return bathroom fans hoods and dryer vented, 3 erv installed each system.

Installation of new heating and cooling air systems- heating natural gas (first floor) and (second floor) 3T installation of 2 gas furnaces 60,000 BTUH 92% indirect vented outside new air conditioning coil R-454B - installation of 2 Bryant condensing units 3 tons 14.3 Seer2 208/230 VAC single stage - all ductwork installation - all new supply and return hood for bathroom and dryer.

Installation of a furnace and heat pumps. Zoning is required for outside work.

HVAC

Install one 40000 BTU gas furnace, new duct work 1/4 25' gas line - navan hot water 240000 BTU, 3-ton condenser + coil.

Install one 3-ton air handler with ductwork and a new 3-ton HP condenser—second floor only.

Simple change ENTIRE REAR water barrier out. Change out air conditioning only. ROOF SECTIONS ONLY: Tear off and re-roofing, complete ice and coverage, IKO Dynasty lifetime shingle, ridge vents, residing and.

Install gas line for new furnace.

Install one Navien combi boiler, NG model 240, including all work related to the new boiler. Install new baseboard heat on the first floor. Remove the old boiler.

HVAC

Line. Convert Full Roof Replacement 35 SQ new recommendations. Oil to gas, remove oil tank and furnaceÂ-House. Remove existing roof shingles and replace with architectural asphalt shingles following code and manufacturers Install ice and water shield as required by code and apply 4â€.

Installing 1 gas furnace 90% with air conditioning unit split in 3 zones and all duct work necessary.

HVAC

Installing 2 gas furnace with 2 condensing units and all ducts work necessary.

Installation of (1) Fujitsu condensing unit, 15K BTUH, single zone, 208/230 VAC, single stage, 20 seers; installation of (1) wall-mounted indoor unit, 5K BTUH, 208/230 VAC, R:410:A.

Install gas furnace 60000 BTU with air conditioning install ductwork for 3 zones, remove oil boiler and tank oil tank, install water heater tanks, gas line for water heater and furnace.

HVAC

Installation of 2 Payne fan coils 3.5 tons 208/230 VAC single stage with Hydronic hot water coils for heating cycle, installation of two bryant Legacy condensing units 3.5 tons 13.4 Seers2. Refrigerant R-454B. also we will provide all the new ductwork Installation for whole house we have to do all bathroom fans kitchen hood and dryr vented and ERV Ventilator.

Install one coil and condenser, 2.5 ton, for the first floor; one coil and condenser, 2.5 ton, for the second floor.

HVAC

Replace the existing furnace with new air conditioning and all necessary ductwork.

HVAC

Install 1 mini-split condenser, 42K BTU, and 2 mini-split wall units, 24K BTU and 18K BTU.

Install a new central air heat pump system with new ductwork.

Install 2 gas furnaces-40,000 BTU with 2-ton air conditioning coil, install 2 condenser units 2-ton, install duct work for, 3 zones.

Disconnect and remove 6 existing RTU's, replace and connect 6 new RTU's of the same tonnage.

Install a new heating and cooling air system: (1) First company unit, 4 tons; and (1) condensing unit, 3.5 tons, single stage. Also provide all ductwork and install new supply and return, 3 zone.

HVAC

HVAC

HVAC

HVAC

HVAC

Install gas furnace with 2 stage with 3-ton AC; ductwork for 2 zone - first floor- second floor.

Installation of 1 First company hydronic air systems, 3 zones using existing oil boiler; installation of 1 bryant legacy condensing unit 3 tons, 16 seers 208/230/VAC - we have to do all ductwork installation for whole house; everything new kitchen hood, bathroom fans and dryer vented.

Remove oil tank; install gas furnace; replace existing AC system and ductwork for 2 zones; 60,000 gas furnace and 2/5 ton AC system.

Installation of 2 gas furnaces, 2 Sentry condensing units with 2 AC coils.

Install a gas furnace with air conditioning for a house divided into 4 zones.

Installing 1 gas furnace with all necessary ductwork.

HVAC Work

Install 3-ton hydro air handler with 3-ton condenser. 2 zones. New ductwork.

Installation of a new heating and cooling zone for the basement area using the existing heating and cooling system, and installation of one bathroom fan.

HVAC Work

Remove the old furnace and install a new gas furnace and condenser unit.

Install 1" gas pipe, 25' length ti supply stove, water heater, gas furnace and dryer.

Replacing 2 existing gas furnaces with 2 outdoor condensate units, new insulation, and new HVAC to comply with flood plain regulations.

Install 1 condensing with 3 indoor units/mini split system.

Installing 2 gas furnaces with 2 AC units, 1 mini-split unit with (1) AC condensing unit, and all necessary ductwork.

Add heating and cooling zone for attic area in existing 60k btus furnace, add ductwork and new thermostat for new zone, heat loss test attached.

Install 2 gas furnaces with air conditioning and new ductwork.

First floor gas furnace with 3-ton condenser, second floor gas furnace with 3-ton condenser and basement 2 heads with condenser split system.

Install high efficiency gas boiler with 2 circulators, gas piping for boiler.

Replace condenser and AC coil (3 ton); relocate ductwork for 3 zone.

Install 2 gas furnaces with 2-ton AC units. Each condenser is 2 tons. Ductwork for 2 HVAC systems.

Relocate vents and ductwork.

Installing heat pump system with ductwork for 2 zones, install 3-ton condenser units, relocate existing condenser unit.

Install a 2 1/2-ton coil and condenser with 2 zones and new ductwork, and a second-floor furnace with a 2-ton coil and condenser with ductwork.

Install 2 heat pump systems with ductwork, 2-ton second floor, 2.5 first floor.

Remove the oil furnace and oil tank, replace them with a 3 ton heat pump, replace first-floor ductwork, and add ductwork for the addition’s 2-zone system.

Installation of ductwork only.

Install 60000 furnace, one 2 1/2-ton coil and condenser, new ductwork, and a 2-zone system.

Install one new furnace with a 2-ton cased coil, line set, one (2)-ton condenser, and new ductwork.

Install two mini split condensers, One 2-ton and one 2 1/2-ton and head units, 5 line sets, one to each head, 4 70000 BTU heads and 1 12000 BTU head.

Alteration

Installation of gas pipe for a boiler and stove; replacement of an oil boiler with a gas boiler and combi boiler; removal of a tank.

HVAC Work

Replace the gas furnace and ductwork.

Install a replacement BTU furnace, 3-ton coil, and 3-ton condenser, including ductwork; remove the oil tank.

Install furnace and 3 1/2-ton condenser and coil with ductwork - 2 zones - 1st and 2nd floors.

New gas piping installation from outside to the stove.

HVAC

Air conditioner system, 2 tones air handler, 2 condensing units, all duct work.

HVAC Work

Install one condenser with 2 head units, including lineset.

New AC/heat pump on 1st and second floor - 2 ductless 9K BTU ground level and basement.

Add one zone ductwork only.

Replacing the existing heat pump system; updating ductwork for the first floor.