32 Cobblestone Pl
Wilton, CT- 2025Minor Building Permit
Building
$3.3K
Local provider profile
Documented work across Connecticut based on attributed municipal records.
Contact information
These details have not necessarily been claimed or independently confirmed by the provider.
Work history
Individual records are grouped by address. Totals include only values reported in public records and may not equal final construction cost.
Building
$3.3KInstall 1-7" x 25' 100% stainless steel2 ply smooth wall lining system with componets to vent 1-2-6" oil fired furnances 175,000 btus each - totaling 350,000 btus.
$3.6KReplace the existing damaged prefabricated fireplace and chimney vent.
$17.4KComponents. Increasing the our home for After consulting during this process. Ceiling height from 8ft to 9ft (ONLY)-We're planning a renovation of which I currently have a permit (Record #: RB-25-228) to start the work. With the contractor, he aims to raise the ceiling height of the first floor This permit will be considered phase 2 in this project. No CO will.
$10.4KAlteration Residential
$8.4KDismantle the existing chimney structure to the lower roof line, rebuild it with new brick and mortar, and add approximately 7' to the existing chimney height.
$18.5KAlteration
$12.1KMiscellaneous.
$30KDismantle the entire exterior of the fireplace chimney. Form and pour a new concrete footing and hearth extension. Reconstruct the firebox, set a new blue stone hearth, and build the smoke chamber and exterior brickwork. The job includes new 13-by-13-foot terra-cotta flues, a vapor barrier, wall ties, and new lead flashing at the roof termination.
$39KInstall one 6" × 30' 100% stainless steel 2-ply liner for a Peerless oil boiler rated at 105,000 BTUs, with all components.
$2.3KBuilding
$4.9KInstall 6" ss liner.
$1KInstall a wood fireplace insert.
$3.8KInstall a 100% 6” x 35’ 2-ply stainless steel lining system for 1 – 6” gas furnace, 125,000 Btu’s, and 1 – 3” gas water heater, 40,000 Btu’s. Job includes all components.
$2.9KMechanical: install a new furnace liner.
$4.5KInstalling a Regency F3500 wood stove with chimney. Installation to comply with the manufacturer’s specifications and instructions. State education fee paid: $1.56.
$6KInstall natural gas log set. Installation to comply with manufacturer's specifications. State education fee paid: $1.04.
$3.9KInstall 6" ss chimney liner to vent gas furnace and hwh need cleaning and inspection report and htg permit before inspections.
$2.2KStainless steel liner system for existing oil boiler. 6" two-ply 316 stainless steel liner.
$2.5KInstall 20 ft. Of 7 inch oval stainless steel liner to vent the Gas Furnace. State Ed. Fee paid.: $. 78.
$2.6K