Stanley Elovecky

HVAC Work

HVAC, Geothermal, Chimney liners & Oil Tank Permit WILTON

HVAC Work

Replace the tank water heater with an on-demand, direct-vent gas water heater.

Install 2 head Wiring for ductless heat pump system New inground swimming pool, New underground feeder, outdoor panel.

Replace the oil furnace and air conditioning with a new gas furnace and air conditioning, and install new natural gas service.

New 1" black gas line from meter into house-to 3/4 trac to furnace.

Replace existing gas piping and pressure testing.

Replacing existing tankless boiler to a floor mount burnham alpine boiler and connecting back to existing indirect tank.direct yenl.

Mechanical: attic central AC change-out.

Replace 3 rooftop units-rigging by helicopter (1)15-ton trane rooftop 2 12.5 trane rooftop.

Remove the existing oil tank and oil boiler; install a direct-vent Navien combination boiler, model NCB240E.

Oil-to-gas conversion, including gas lines from the meter to a new natural gas Navien combination boiler.

HVAC

5 indoor wall-mounted ductless units and 1 outdoor Mitsubishi ductless unit, 3 ton.

HVAC

Direct replacement of existing oil boiler.

With (5) matching indoor units.

Model number A951X040BU35AB.

HVAC

Installation of a Mitsubishi heat pump, model MX3-C30NAHZ24, and 3 matching indoor heads.

Remove existing Hardwiring an circuit was existing Romex, so we gas boiler. Replace with Burnham ALTAC-200. Emporia EVSE mounted inside the garage set to 40 amps. The EV charger and was installed when the home was built. The circuit was run with #6 will install a 50-amp breaker to protect the EV charger circuit. The EVSE has built-.

And ductwork to accomadate renovations.

Remove the existing air handler and replace it with a Trane, model TEMA0B24H21SC.

Run a new gas line from a new meter to a new furnace and install a new direct-vent furnace.

Replace the attic air handler and outdoor AC unit with a Bryant air handler and condenser.

Replace the air conditioning system, including the condenser, air handler, and lineset.

Fired furnace.

The gas company shut off and locked the gas meter due to a leak. Repair and pressure-test the gas piping, and replace the existing gas boiler with a wall-hung Navien.

Installation of a wall-hung combi boiler, black pipe from the new meter to the manifold, and TracPipe from the manifold to the boiler.

HVAC Work

HVAC Work

Remove the existing oil furnace and replace it with a gas furnace and gas line. Approx. piping from the existing gas line to the new furnace.

18000 WHERE OIL FURNACE IS NOW (LOOK AT SOAP TEST AT INSPECTION) Strip and re-roof 26.95 sq's with IKO Dynasty. Install Sealoron XT ice and water shield barrier and Valora Synthetic underlayment. Replace any.

Installation of a direct-vent natural gas combi boiler; removal of the existing gas water heater.

Mechanical: Remove the existing gas furnace and replace it with a new one.

Mechanical: Remove existing air conditioning. Replace the condenser in the same location with a heat pump and matching indoor AHU.

7000remove existing AC condenser. Replace in same location with trane condenser +atlu stanley.

Install a new Mitsubishi heat pump system with an outdoor unit and 2 indoor heads: one on the main floor and one in the master bedroom.

Replacement of gas boiler; remove existing boiler and water heater and replace with a combi gas boiler.

Replace the existing AC condenser rooftop unit with a 2.5-ton AC rooftop unit in the same location.

Installation of 3 zone ductless heat pump systems, outdoor unit, 1 indoor head for family room and 2 indoor for each bedroom.

2 new heat pump systems on main floor, 3-ton ducted outdoor matching variable speed, top floor - 3 zone variable speed ductless, 3 wall air handlers.

Remove the existing air conditioning condenser. Replace it in the same location with a heat pump and matching indoor unit.

Replacement of the existing air conditioning system. Remove the existing outdoor unit and replace it in the exact same location with a Lennox heat pump and matching indoor unit.

/replacement of existing air conditioning system. Remove existing outdoor unit from back of the house w Lennox heart pump and matching indoor unit.

New installation of 2 5-zone ductless heat pumps, with the outdoor unit on the left side of the house.

Installation of a new gas combi boiler; 0 black piping from the meter to a tee and pipe to the new boiler.

Install a gas line to the kitchen stove and run a gas line from outside through the cabinets to the area behind the stove. Install a gas shutoff valve and provide a stub-out for a future water heater. Size the piping to fit a future furnace.

Install a direct vent combi boiler.

HVAC Work

Oil to gas conversion - place new gas boiler in with 15' black pipe and 1" to manifold, 3/4 trac < 15 ft to boiler.

Oil-to-gas boiler conversion: removal of existing equipment and replacement with a new boiler; installation of a new gas line from the new meter to the new boiler and stove.

AC replacement: Remove (1) existing AC unit and replace it with a new one in the same location. Replace the existing gas furnace and (2) Trane cased coils.

Heat pump replacement: remove the existing heat pump and place a matching indoor unit in the same location.

Convert from oil to gas with a direct-vent combi boiler and a new gas line from the new meter to the boiler.

Oil to gas conversion - remove oil boiler and install combi boiler to gas piping 10' from meter inside tac to new boiler - direct vent.

Replacement of AC systems - remove existing condenser and replace 4-ton AC and add mitsubishi 2 head ductless.

HVAC

HVAC

HVAC

HVAC

HVAC

HVAC

HVAC

Install 2 heat pumps and 2 air handlers.

Replacement of gas boiler; removal of current equipment; gas piping from current line to boiler.

Install a gas furnace; convert from oil to gas.

HVAC Work

HVAC

Heat pump outdoor units and indoor units.

Install a Mitsubishi Hyper Heat Pump with 1 ducted indoor air handler and 2 indoor wall units.

Convert the chimney-vented oil boiler to gas; direct-vent boiler. Remove the above-ground oil tank.

Remove the existing above-ground oil tank and boiler; install a new gas steam boiler. The gas line is already in the home for the existing water heater.

Install a new gas line for the furnace, a new Trane gas furnace, a new air-conditioning coil, and a new air-conditioning condenser.

Remove the oil boiler and indoor oil tank; run a new gas line from the new meter bar to the new boiler.

Mechanical: replace oil-fired furnace with a variable-speed heat pump system.

Run 10 ft. Of 1'1/4" gas line to generator. Receipt 21-3542 for $40 paid.

Mechanical gas/propane line for stove, water heater, and furnace; inside piping only. Underground line and tank by others.

Mechanical: 2 direct-vent gas furnaces; run a new gas line and new gas service.

Mechanical: Install 2 heat pump systems.

Mechanical: change from a gas-to-gas chimney vent to a direct vent.

Mechanical: Remove the oil boiler and install a new gas boiler.

Mechanical: Replace chimney-vented oil furnace with a direct-vent gas furnace. Gas is in the home. Existing air conditioning and electric water heater.

Mechanical: oil-to-gas direct-vent furnace.

Mechanical - remove furnace and oil tank and replace with new gas furnace and condenser, add 50 gallon water heater.

Mechanical - install 2 - head duct less heat pump and 1 outdoor AC.

Mechanical: install heat pump system.

Mechanical: Convert the chimney-vented furnace to gas direct vent; install new AC and water heater.

Mechanical: ductless heat pump and 2-ton variable-speed indoor air handler.

Mechanical: Remove the existing heat pump and install a new air handler/heat pump.

Plumbing: install natural gas water heater.

Mechanical: heat pump, air handler to direct vent, and existing gas-fired furnace. AC to stay.

Remove gas boiler; install new direct-vent gas boiler with indirect.

Separate gas piping off meter; install replacement gas boiler.

Remove existing oil boiler, install new boiler, and reconnect to indirect heater and 2 hydro zones.

1 outdoor heat pump; 2 1-ton air handlers in attic; 1 1-ton air handlers in basement.

Remove the oil boiler and install a new gas boiler: a direct-vent Lochinvar combi boiler.

Remove the oil boiler and indoor tank. Install a new direct-vent combination boiler and direct vent. Install a new 1 1/4 black gas line to the manifold and gas pipe to the boiler.

Install 1 Mitsubishi heat pump, 48000 1 ducted a/r handler. 2 1/2-ton 1 wall-mounted unit, 1 Mitsubishi heat pump, 3-ton, 2 wall-mounted units.