Local provider profile
Documented work across Connecticut based on attributed municipal records.
Work history
Individual records are grouped by address. Totals include only values reported in public records and may not equal final construction cost.
Test for inspection. Bond the system as needed.
$1.3KTest for inspection. Bond the system as needed.
$1.3KSink and shower Install new in pvc pipe install shower valve running pex for water lines gas piping off the existing gas main to code for a future generator. Air.
$6KLine down Install new to tie in to main sewer line and tieing in vent line in attic 1 halo lit channel letter set, 1 window vinyl and 2 double sided.
$2.5KInstall new underground rough plumbing for DWV and domestic water for tenant fit-up for “The Academy” school code. Connect all new plumbing within the retail space for 7 sinks, 1 toilet, and 1 laundry.
$12KInstall new underground rough plumbing for DWV and domestic water for tenant fit-up for “The Academy” school code. Connect all new plumbing within the retail space for 7 sinks, 1 toilet, and 1 laundry.
$12KModify the existing gas main to relocate water heater for the building and supply 3 gas lines to 3 new forced air furnaces. Each unit to be 125,00 BIU units and to be supplied by 1" iron pipe to code. Air test for inspection as required.
$4.5KInstall new domestic water and modify the existing domestic water and drain, waste, and vent (DWV) systems to accommodate 11 sinks and 2 toilets to code.
$15KInstall new gas main to new meter location and pipe to the roof of building, connect to existing heating locations to code, install 1 underground gas main with tracer wire at minimum of 18" depth to the new meter location and connect to water heater, air test to 15 LBS for rough inspection.
$4.5KRun 1/2 PEX lines from the laundry box for a future outside shower.
$1.5KRun 1/2 PEX lines from the laundry box for a future outside shower.
$1.5KRemoving the bathtub in the basement bathroom and adding a shower. Relocating the drain and installing a shower valve with a handheld showerhead.
$1.5KRework the existing DWV and domestic water to code for 1 3 bay sink, 1 service sink, 2 hand sinks 1 dipper well sink ad grease trap.
$5.5KRework the existing DWV and domestic water to code for 1 3 bay sink, 1 service sink, 2 hand sinks 1 dipper well sink ad grease trap.
$5.5KRework the existing gas main to code for the water heater and rooftop makeup air unit: 1 stove, 1 fryer, and 1 furnace.
$2.9KPressure test 2 existing gas mains to allow the gas meters to be unlocked and the existing heating system to be turned back on to install temporary heating.
$500Install new gas main to code for 1 -40,000 BTU gas range, and air test for inspection.
$600Install new gas main to code for 1 -40,000 BTU gas range, and air test for inspection.
$600Re-rough the 2 existing upper-level bathrooms to code; install a new kitchen faucet, dishwasher, and water line to the fridge.
$6.8KRunning steel pipe 1" 6ft to 3/4 and 1/2 branches to 1 range, 1 boiler, 3 fireplaces and 1 generator.
$5KRunning steel pipe 1" 6ft to 3/4 and 1/2 branches to 1 range, 1 boiler, 3 fireplaces and 1 generator.
$5KFirst floor - 1 toilet, 1 lavatory, 1 kitchen sink. Second floor - 3 toilets, 3 showers, 1 bathtub, 4 lavs, 1 laundry sink, 1 washer machine. Third floor - 1 sink, 1 shower, and 1 toilet.
$15KModify the existing 1/2 lbs system to 2 PSI to accommodate the new load requirements. The total new BTU load, including the existing system, is 1,300,000 BTUs. Pipe new equipment to code and air test for inspection.
$8.5KModify the existing 1/2 lbs system to 2 PSI to accommodate the new load requirements. The total new BTU load, including the existing system, is 1,300,000 BTUs. Pipe new equipment to code and air test for inspection.
$8.5KInstall 3 WV, 3 lavatory, 6 hand sinks, 3 dishwashers, 2 ice machines, 1 3 bay sink, 1 mop sink, 1 75 gallon grease trap, 4 floor drains, 1 2 bay sink and add hot water storage tank to existing system.
$30KReconnect to existing building roof drain drainage within the building with new 4" schedule 40 PVS, including mechanical connections, install overflow piping connection in the egress light.
$3.5KRe-route the existing gas main to new water heater location, air test for rough inspection.
$1KInstall DWV and domestic water to code - for 8 second floor studio apartments, each apt include 1 lavatory, 1 toilet, 1 shower, 1 kitchen and 1 washer, first floor includes 1 ADA laundry.
$26KInstall rough plumbing for 1 water closet and 1 lavatory on the first floor and bathroom.
$1.2KRelocate the gas line and pressure-test the new piping to 15 lbs on a 30# gauge.
$1.7KInspection to code.
$1.3KAdd 1 hand-wash sink and 1 utility sink to code for the tenant fit-up.
$4KAdd 1 hand-wash sink and 1 utility sink to code for the tenant fit-up.
$4KInstall 1 toilet, wall-hung sink to meet ADA requirements, rough plumbing, and trim to code.
$5KInstall 1 lavatory, toilet, 1 3 bay, 1 hand sink, 1 ice maker and 1 glass washer, all DWV and domestic to be installed to meet code.
$4.5KInstall a new gas line to a new furnace to code.
$800Install DWV and domestic water to code for 1 ADA toilet and 1 ADA sink.
$2.3KInstall 9 gas mains to 9 individual gas furnaces on the third floor, install gas to 9 individual ranges on the third floor, and pressure test.
$10KInstall D.W.V. and domestic water to 9 apartments on the third floor of the building, to code: 1 kitchen, toilet, 1 lav, shower, and washer.
$12KInstall 2 gas mains to 2 110,000 BTU furnaces, gas mains to carry load - shall be 1" runs to be estimated at 60 ft to furnace, install 2 gas mains to 199,000 BTU tankless heaters, loads to be carried through steel mains.
$10KInstall DWV and domestic water to 9 offices on the second floor to code (1 toilet, 1 shower, 2 lav, 1 mop sink, and 1 floor drain in the janitorial closet).
$12KConvert the existing 1/2 bath to meet current code (ADA) requirements.
$1.5KConnect existing gas piping to new furnace, with an air test at inspection.
$850Connect new PVC DWV to existing to update half bathroom to code, domestic to be pipes to code.
$1.5KReconnect to the existing plumbing and domestic water for (1) 1/2 bath to code.
$1.5KAlter existing rooftop gas to connect to 2 interior furnaces on the second floor. Air test existing and new gas mains to 15 lbs for rough inspection.
$10KAlter existing rooftop gas to connect to 2 interior furnaces on the second floor. Air test existing and new gas mains to 15 lbs for rough inspection.
$10KInstall all DWV and domestic water to code for 2 second floor apartments - 8 water closets, 6 lavatory, 4 shower and 2 washers.
$15KAir pressure test of 2 existing gas mains in the building basement for existing rooftop units.
$350Compact new kit gas appliances to the existing gas main in the existing kitchen, install new gas piping to 3 new gas furnaces within (unit 1) space; air test new and existing gas mains for inspection, 3 fryers, 1 6 burner over, 1 grill top and 1 rooftop make up air unit.
$3.5KCompact new kit gas appliances to the existing gas main in the existing kitchen, install new gas piping to 3 new gas furnaces within (unit 1) space; air test new and existing gas mains for inspection, 3 fryers, 1 6 burner over, 1 grill top and 1 rooftop make up air unit.
$3.5KInstall new DWV and domestic water to all new fixture locations to code. Install 2 new ADA baths, 1 mop sink, 5 hand sinks, 4 toilets, 4 lavatory sinks, 5 prep sinks, and 1 grease trap sized according to GPM flow rate calculations.
$17KInstall 1 new grease trap sized accordingly. All existing pipes remain. All alterations, inspection ports, and valves are to be piped according to manufacturer specifications.
$2.8KInstall 4 sinks in exam rooms to code and install 1 mop sink in back room.
$3.2KInstall (1) 3-bay sink, (1) hand-washing sink, (1) mop sink, and (1) rinse sink to code.
$2.1KInstall drain, waste, and vent (DWV) and domestic water to code for an ADA bathroom.
$2.7KInstall gas piping to the new furnace location. Gas piping to continue from the existing gas main.
$1KGas pipe, six-burner stove, 1 fryer, and 1 cooktop.
$1.5KInstall DWV to code for a 2-bay sink, hand-washer sink, and 1 mop sink. Pipe all necessary fixtures to the existing grease trap.
$3KDisconnect the existing building gas main to remove unused piping and fittings deemed unnecessary; air test and connect to existing divided meter, install 1 future 1", main line along with all other previously gas mains.
$1.3KInstall a steel gas main from the meter room to the new tenant space. Gas load to be carried through the existing 1" main line, to be knocked down to 1/2 lbs at the furnace termination in the tenant space.
$1KInstall 1 lavatory, water closet, and connect existing DWV.
$1.5KInstall a steel gas main from the meter room to the new tenant space. The gas load is to be carried through the existing 1" main line and knocked down to 1/2 lbs at the furnace termination in the tenant space.
$750Install a steel gas main from the meter room to the new tenant space. The gas load is to be carried through the existing 1" main line, to be knocked down to 1/2 lbs at the furnace termination in the tenant space.
$650ADA bathroom and 2 prep sink and hand sink.
$4.5KInstall a future gas manifold for 9 meters, disconnect the existing gas line, and reroute gas to the new manifold.
$575Install 1" steep pipe gas main to new tenant space, connect to existing gas in basement and supply gas to 1 - 110,000 BTU furnace with H, 1 - 90,0000 BTU oven, 1 - 84,000 BTU griddle and 1 220,000 BTU stove, 1" steel to be connected to 2 PSI, existing main line.
$3K2 hand wash sinks, 2 water closets, 1 mop sink, 1 3 bay sink with grease trap, 2 lavs, install rough DNV and domestic water to all locations, install water heater (gas).
$6.5KInstall 1 lavatory sink (sink outside the existing bathroom) to code.
$800Install 1 lavatory sink (sink outside the existing bathroom) to code.
$800Install a gas main to the furnace location in accordance with code.
$1KConnect (1) toilet and (1) sink to the existing DWV and domestic water to code.
$1.2KInstall 1 gas main supply to each furnace in each apartment (5 apartments).
$5KInstall DMV and domestic water to code for 10 water closets, 10 lavs, 5 showers, 5 kitchen sinks and 5 washers and emergency drains.
$29KInstall main line from existing meter location to new furnace location in basement area, furnace to be BTU load; air test to be in basement.
$750Install basement apt rough plumbing to code, 1 lavatory, 1 water closet, 1 shower, 1 kitchen sink and 1 sewer ejection pump.
$3.1KInstallation of an outdoor sink with hot and cold water.
$650Install 4 sinks and 1 toilet and 1 electric hot water heater.
$1.4KInstall 4 sinks and 1 toilet and 1 electric hot water heater.
$1.4KInstall new and existing pipeline to code for (1) 1/2 bath, (2) sinks, and (2) pedicure chairs.
$5.2KInstall (1) toilet and (1) sink; connect DWV and domestic water to existing to code.
$1.5KConnect the existing gas main to the new furnace to code.
$1KExtend the existing gas main to the rooftop unit in a new location. Air-test the new and existing main units.
$1.4KExtend the existing gas main to the rooftop unit in a new location. Air-test the new and existing main units.
$1.4KConnect the new 1/2 bath to the existing D.W.V. and domestic to code.
$2.5KInstall D.W.V. water to 9 apartments to code, install a water heater to service all 9 apartments, and install underground D.W.V. through the existing slab.
$68KInstall D.W.V. water to 9 apartments to code, install a water heater to service all 9 apartments, and install underground D.W.V. through the existing slab.
$68KConnect the existing and main to the new water heater.
$1KReworked master shower drain installed new shower valve with handheld moved over master vanity water and drain line hall bathroom, installed new tub and tub shower valve, clean up vanity water lines, relocate washer machine water and drain, drain down to crawl and water drain.
$4KInstall washing machine box in basement for washing machine, rework laundry sink drain on second floor, re-do kitchen water and drain line in hall bathroom, re do low water lines, install new tub and vale in master bathroom, install shower valve, drain and relocate toilet, vanity water and drains.
$5KFirst floor bath remodel - 1 lavatory, 1 shower, 1 water closet, run new domestic water and DWV to kitchen sink and laundry.
$3KInstalling PVC drain and water lines for a toilet and sink in a new addition; running drain and water lines through the basement.
$2.2KInstall 1" black pipe gas main 15' to water heater location. Supply 199,000 to 1 natural gas w.h. air test to 151 lbs.
$475Install 1" black pipe gas main 15' to water heater location. Supply 199,000 to 1 natural gas w.h. air test to 151 lbs.
$475Plumbing: Install 4" PVC drops to be capped in the first-floor ceiling and connected to the basement main.
$1KPlumbing - first floor - "Cordial Dentistry" - 4 dental chairs, 2 water closets, 1 waste, 6 laves 7 1 electrical water heater.
$10KPlumbing - 11 apartments - kitchen, laundry, tub/shower, toilet, lavatory in each unit - 11 washing machines and 11 electric water heaters.
$55KPlumbing renovations to convert the building.
$13KMechanical work: gas piping to relocated generator.
$1KPlumbing - 3 bath sink with grease trap, 2 bay sink with grease trap, 2 bay food prep indirect waste, 2 hand wash sinks.
$2.1KPlumbing - 3 bath sink with grease trap, 2 bay sink with grease trap, 2 bay food prep indirect waste, 2 hand wash sinks.
$2.1KPlumbing: Install a new lateral sewer main to replace the broken one.
$4.2KPlumbing: Inspect work done for a sink, toilet, jacuzzi tub in the basement bathroom, and sewer ejector pump.
$6KPlumbing: Remove and replace all plumbing lines to accommodate the new kitchen setup and new kitchen sink.
$1.2KPlumbing: change grease trap and add 1 prep sink at “Avenida Venezuelan Food.”
$1KPlumbing: Rework the main vent stack and 3 vents off the stack; relocate 1 vent line.
$600