600 Connecticut Ave

Install 50 kW diesel generator on proposed concrete pad and automatic transfer switch for AT&T cellular equipment.

Install a 50 kW diesel generator for AT&T cell equipment.

Disconnect and reconnect power and data to replace the paint desk.

Parking deck repair.

Within Home Depot, disconnect then reconnect electrical to the UPS in the computer room.

Repairs to the parking deck and waterproofing for Home Depot. #11-18 SP; #95-1214-03. No change in the footprint, height, area, or layout of the existing structure. No change to landscaping, and repainting of lines must match existing.

Install a generator for AT&T #11-18 SP #95-1214-03.

SCO/L shelf checkout: 1 IG duplex - R circuit, cash machine: 1 IS/IG circuit -beverage coolers: 1 LC quad (24 hour power) - up to 3 on same circuit, PVM monitors: 1 IS quad (24 hour power) EACH.

Replacement of 7 existing gas fired heaters, existing gas line, connections and electric will be reused.

Replace TVSS devices connected to I.T.-related 120/208 V panels with new model.

Upgrade to 3 meter 800 disconnect and 200-amp service for Dish service.

Install dirty power (24-hour) duplexes for locking CAT equipment based on prints.

Install a duplex receptacle (LC circuit/gray receptacle) for a new minute key machine.

Disconnect lights in bays 05-006,04-017 and reconnect lights in 04-017,04-019, disconnect all electrical in bays 04-Ec2,03-020, and 50-013, and disconnect lights in bays 34-001,34-003,34-005,34-007, and 34-009 - install quad receptacles behind bays.

Disconnect lights in bays 32-0006 thru 32-016 and 32-001 thru 32-015, install quad receptacles in bays 32-006 and 32-001.

Add (3) antennas for “DISH,” paint to match, and associated site work within the existing gated electrical area.

Existing pole to add 3 antennas for "Dish" - no height increase; paint to match. Obtained Siting Council for approval (see attached). Includes some associated site work within existing gated electrical area.

Replace the dry valve and system in the high-bay storage area in the garden section, then re-pitch the system in the canopy area.

Modify existing telecommunications equipment for AT&T.

Remove existing antennas and mounting equipment and install a new antenna with new mounting equipment on the existing 150' AGL monopole. Paint to match. Install new equipment within the existing ground shelter as well.

1 Double sided ground sign panel replacement 1 south side channel letter replacements, and 1 east side channel replacement.

"home depot" signs.

Perform various disconnents/reconnects for reset team to set bays to include in bay lighting and in rack power.

Install approximately 550 ft of 4" PVC from existing pole 8599 to cell site with fiver run.

Zoning sign-off: Install 530' underground fiber run in 4' conduit and (1) handhole.

ZONING SIGN OFF: Install 530' underground fiber run in 4" conduit and 1 handhole.

Install 4 power drops and 1 quad in bay.

Electrical: Disconnect lights in bays, add a quad outlet, and install LED lights above range hoods.

Electrical: Disconnect lights and power from grills; install power drops and a quad outlet behind the end cap.

Electrical: Install LED lights in hedge trimmers and leaf blower bays.

Electrical: Disconnect and remove wiring inside the bay; add an outlet inside the bay.

Electrical: Disconnect LED/light fixtures.

Electrical—disconnect and reconnect data line; remove display and connect new display.

Electrical: New LED lights for merchandise and replacement of fluorescent fixtures. No new circuits. “Home Depot.”

Electrical: Install power to a new millwork desk.

Electrical: Disconnect and remove any electrical in the bay, including conduit and light fixtures.

Replacing 3 antennas with 6 new antennas on existing, per sitting council 4/27/18 letter attached. AT&T.

Replace 3 exist. antennas with 6 new antennas on exist. tower.

Electrical: Disconnect and remove all electrical to the current display in bay 44-013.

Electrical: Move electrical at customer service for online order storage and install a quad outlet.

Structural repair on parking deck: support and miscellaneous repairs at “Home Depot.”

Electrical: Install card drop in bays.

Electrical: Relocating a quad on the end cap of the pod for an existing Samsung washer/dryer display.

Electrical: Disconnect all electric in Hampton Bay track light bays and reconnect after reset.

Electrical - Install 1 quad outlet in flu space behind end cap of aisle in electrical dept.

Replacement antenna equipment (3 units), 3 RRV; all equipment on the existing tower.

Electrical: Disconnect and reconnect power to displays.

Electrical - isconnect power and reconnect to new desk - flooring dept.

Electrical: Disconnect and reconnect under-cabinet display.