28 Cross St

Run a new water line to the equipment server of Bloom Energy fuel cell.

Run a gas line from the new meter pad installed by the utility company to the new energy server.

Install underground conduit and cable to feed fuel cell.

Install a fuel cell at the existing “Cablevision” site.

Add fuel cell to exiting site—Cablevision, as approved by Siting Council.

Install 1 wall sign and 1 replacement ground panel sign for “Optimum Altice”.

1 wall sign proposed, 10.3 sf / 1 replacement ground sign panel, 3.6 sf - for "Optimum Altice (window sign OK). No flags, folding signs or banners.

Mechanical: Install new ductwork as per plans and specifications, and install an LG mini-split as per plans — “Cablevision.”

Install (1) air conditioning unit at ground level, exterior, adjacent to the building, as per plan.

Plumbing: new mop sink and water fountain.

Electrical: Install power, lighting, low-voltage cabling, and a fire alarm; add subpanels.

Tenant: existing space formerly occupied by Cablevision, now “Altice.”

Tenant fit-up and renovations to existing space, formerly Cablevision, now Altice: 10 spaces/retail area. Any additional changes may require Commission review.

Interior and exterior renovation to a single-family residence.

Mechanical: Replace the DX expansion coil and condensing unit. Modify the existing duct to use fabric duct at a lower elevation in the studio; seal and insulate the existing duct.