6 Morganti Ct

Set a 60-gallon cylinder and run a line from the tank to the cooktop. Connect after town inspection.

Scope of WorkTrane XR17 Heat Pump/Air Conditioning Replacement-Delivery and Installation of a Trane 5TWR7048A1000A 17 SEER2,4-ton R454B Multi Stage Heat Pump Condenser, and a Trane 5TXCD008AS3HCA 4-ton evaporator coil. Included in the system installation is all necessary piping, wiring, and duct work transitions in the existing furnace plenum to accommodate new evaporator coil. A new copper refrigerant lineset will be ran through the basement, to the outdoor unit location. Outdoor condensing unit will be set on an equipment pad with heat pump risers leveled over crushed stone. A new pvc drain will be assembled and ran into a new condensate discharge pump. A new EcoBee STATE6P-01 Premium Wifi Thermostat with a wireless remote sensor will be installed. Entire system installation will be completed in a clean and professional manner that meets or exceeds manufacturer's specifications and local mechanical code. Removal and disposal of the existing equipment is included. Basement Daikin Aurora 12k BTU Ductless Mini Split Installation-Delivery and Installation of a new Daikin Aurora RXT12AVJU9 Ductless 21 SEER2, Cold-Climate Heat Pump Condensing Unit. Included in the system installation is a new copper refrigerant line set, communication cable, and necessary condensate drainage. One Daikin FTXV12AVJU9 12,000 BTU indoor wall mount unit will be installed on the interior wall of the basement. The indoor wall mount unit will have a Rectorseal SS610E drain pan float switch per mechanical code. Lineset for the indoor unit will run through the furnace room to the outdoor unit location on the rear of the home. The condensate drain will run into the condensate pump at the furnace. Lineset where exposed on the exterior of the home will be concealed in white Fortress line hide. New condensing unit will be set on a preformed concrete equipment pad with 6 in risers to prevent snow buildup from affecting system performance. System will be pressure and vacuum tested upon completion of the installation. Entire system installation will be completed in a clean and professional manner that meets or exceed local mechanical code requirements.

Install 12 replacement windows. No structural changes.